Abstract:Firstly,the 3D finite element model of a large-span transmission tow er lines system w ith main tow er height of 375m and main span of 2 756m is established using softw are SAP2000,and is transformed to ABAQUS finite element model by the developed interface program SAP2ABAQUS. Then,the approach for achieving the loading process of static effect under the gravity action is given explicitly by using long-period explicit dynamic loading method. By the approach,the shape finding of cable and its initial stiffness are finished under the gravity action,w hich further realized that gravity analysis could be performed subsequently w ith dynamic loading excited by the subsequent earthquake. Besides,the dynamic characters of four types of model w ith different boundary conditions are analyzed and compared,and from the comparison of model component before and after the transformation and their corresponding modal analysis results, the transformation accuracy through program SAP2ABAQUS is verified. Further,the program MEMS_ b V2012. 5 is updated to MEMS_ b V2013. 5 and the multi-point earthquake motions of target field are simulated. At last,considering geometric large deformation and differential input,the developed subroutine given by ABAQUS main program is used to analyze the elastoplastic and collapse of tow er-lines system. The actual engineering analysis results show that:( 1) The developed interface program SAP2ABAQUS is further verified to have reliable accuracy and high efficiency transformation from the aspect of actual engineering.( 2) The developed subroutine is feasible and reliable for analyzing actual engineering.( 3) The static gravity loading process realized by the long-period dynamic loading method w hich is reasonable in theory and feasible in real,and overcome the difficulty that implicit static gravity mode loading cannot be performed subsequently w ith explicit dynamic analysis.( 4) From modal and theory analysis,it show s that the necessity and reliability of selecting the system of four tow ers w ith three lines as analysis object.( 5) The consistency of multi-point earthquake motion and differential input have the significant influence on occurrence and developing distribution of plastic hinges. So,it is very necessary to consider the multipoint earthquake motions as input w hile analyzing the elasto-plastic responses of the similar structural system.

EARTHQUAKE-INDUCED COLLAPSE SIMULATION OF A SUPER LONG SPAN CABLE-STAYED BRIDGE BASED ON AN OPEN SOURCE FE PROGRAM

Study on FE Models in Elasto-Plastic Seismic Performance Evaluation of Steel Arch Bridge

Seismic Response of A Multi-Span Bridge Based on Remote Testing Platform Netslab

Three-dimensional finite element modelling for seismic response analysis of pile-supported bridges

Applicability of Effective Tangent Modulus Method in Evaluation of Buckling Strength of Long-Span Cable-Stayed Bridges

Digital twin-based collapse fragility assessment of a long-span cable-stayed bridge under strong earthquakes

Collapse Prognosis of a Long‐span Cable‐stayed Bridge Based on Shake Table Test and Nonlinear Model Updating

SEISMIC VULNERABILITY ANALYSIS FOR LONG-SPAN CABLE-STAYED BRIDGE

Simulation of the In Situ Spatially Varying Ground Motions and Nonlinear Seismic Response Analysis of the Cable-Stayed Bridge

Elasto-plasticity and Collapse Analysis for Large-span and High Structure(III)——Elasto-plastic and Collapse Analysis of Transmission-lines System under Multi-point Seismic Motions

Dynamic Characteristics and Multi-support Seismic Response Analysis of a Super-large-span Suspension Bridge

Research on Collapse Process of Cable-Stayed Bridges under Strong Seismic Excitations

Feasibility simulation of aseismic structure design for long-span bridges

Finite element analysis and test study of dynamic behavior of a cable-stayed bridge

Study on steel strain-rate and multiple earthquake motions effect on elasto-plasticity responses of 300 m span single tower cable-stayed bridge

Digital twin-based life-cycle seismic performance assessment of a long-span cable-stayed bridge

Entire-Process Simulation of Earthquake-Induced Collapse of a Mockup Cable-Stayed Bridge by Vector Form Intrinsic Finite Element (VFIFE) Method

Time history analysis-based nonlinear finite element model updating for a long-span cable-stayed bridge

Seismic performance analysis of long-span continuous rigid frame bridge with Engineered Cementitious Composite at expansion joints

Integrated Analysis Model for the Seismic Responses of Cable-Stayed Bridges Near Active Faults

Nonlinear seismic response analysis of long-span railway cable-stayed bridges crossing strike-slip faults