Abstract:Submerged floating tunnel (SFT) is a new type of cable-supported structure system for strait crossing. Once the local anchor-cable suddenly fails, it will inevitably cause evident vibration and internal force redistributions of the structure. In order to study the dynamic responses and mechanical behaviors of the SFT subjected to abrupt anchor-cable breakage, a model test is conducted by a set of sensors installed on SFT for cable force, tube displacement and strain measurements. The transient dynamic signals following cable failure are tested and analyzed. Dynamic amplification factor (DAF) and dynamic coefficient (DC) are respectively used to evaluate the impact effect from the cable failure. Meanwhile, finite element simulations are also performed within ABAQUS. The establishments of the finished state of SFT before cable breakage and the dynamic cable failure process are presented both in the model test and FE model. Comparisons between the FE predicted values and the experimental results show a good agreement. On this basis, some influence factors are discussed in different cases of the cable-loss positions and the cable forces of ruptured cable, etc. The results show that the finished state of SFT under dead load (tube redundant buoyancy) after cable-force optimizations is more reasonable than that directly applying dead load without any cable-force adjustments, with more uniform cable force distribution and smaller tube deformation. Although the SFT suffers strong oscillations after sudden cable-breakage incident, no progressive collapse occurs when the safety margin of the rest structure is sufficient. The dynamic effect on remaining cable members due to sudden cable failure can be evaluated by DC method. A DC value of 1.5 is recommended to ensure the safety of SFT anchor-cables. When cable failure happens at the mid span of the tunnel, the deformation of SFT tube is most critical.

Entire-Process Simulation of Earthquake-Induced Collapse of a Mockup Cable-Stayed Bridge by Vector Form Intrinsic Finite Element (VFIFE) Method

Cable Rupture Analysis of Inner-Outer Combined Reticulated Shell-String Structure Using VFIFE

Application of vector form intrinsic finite element method to static analysis of cable domes

Failure Analysis of A Cable Dome Due to Cable Slack or Rupture

Mechanical Behaviors and Experimental Study of Submerged Floating Tunnel Subjected to Local Anchor-Cable Failure

Time-Progressive Dynamic Assessment of Abrupt Cable-Breakage Events on Cable-Stayed Bridges

Research on Collapse Process of Cable-Stayed Bridges under Strong Seismic Excitations

Safety Evaluation of Seismic Behaviour of the Bill Emerson Memorial Cable-Stayed Bridge

Numerical Modeling for Collapse Analysis of Cable-Stayed Bridges using the Improved Applied Element Method

Structural performance degradation of cable-stayed bridges subjected to cable damage: model test and theoretical prediction

Digital twin-based collapse fragility assessment of a long-span cable-stayed bridge under strong earthquakes

Finite element numerical simulation of a cable‐stayed bridge construction through the progressive cantilever method

Multi-scale Damage Analysis for a Steel Box Girder of a Long-Span Cable-Stayed Bridge

Integrated Analysis Model for the Seismic Responses of Cable-Stayed Bridges Near Active Faults

Seismic and Failure Behavior Simulation for RC Shear Walls under Cyclic Loading Based on Vector Form Intrinsic Finite Element

Transverse Seismic Response and Failure Mode of Towers of a Cable-Stayed Bridge Full-Model: Tests and Simulations

Numerical Method for the Form Finding and Force Analysis of Non-Prestressed Cable-Membrane Structures with Mechanism Displacement

Fiber-based damage analysis of reinforced concrete bridge piers

EARTHQUAKE-INDUCED COLLAPSE SIMULATION OF A SUPER LONG SPAN CABLE-STAYED BRIDGE BASED ON AN OPEN SOURCE FE PROGRAM

Finite Element-Based Structural Reliability Analysis Of Cable-Stayed Bridges