Abstract:Thus far, the finite element model updating (FEMU) theory has been employed to address parameter errors between finite element models (FEMs) and actual structures. However, previous studies involving multiobjective optimization based on the FEMU of bridges focused on engineering experience or Euclidean distance alone, which affords a less efficient solution with less recognizability. To address this issue, in this work, an innovative two-phase model updating technique was developed to accurately evaluate a long-service-life cable-stayed bridge strengthening scheme. During the first phase, a sensitivity analysis was performed to determine the main updating parameters. Subsequently, the updating process was developed into a multiobjective optimization problem with the establishment of an objective function, which was solved using an improved genetic algorithm (GA). During the second phase, the ELECTRE-III method was introduced to rank the Pareto front from the first stage and determine the final updating results. Additionally, the impact of the mesh sizes of the finite element model (FEM) on the updating process was analyzed. The relative differences between the original numerical results and the elevation measurements reached 20.5 % and 25.0 %, which were then reduced to 11.7 % and 11.9 %, respectively, after the updating process. Results revealed that the updating process considerably improved the accuracy of the FEM. Based on the updated FEM, the structural responses of the Shengli Yellow River Bridge were evaluated in different cable and bolt replacement schemes. Considering construction progress and safety, optimal strengthening schemes were selected and successfully applied to the actual Shengli Yellow River Bridge reinforcement project. This work and its results are expected to serve as a reference for the effective evaluation of long-service-life cable-stayed bridge strengthening schemes.

Collapse Prognosis of a Long‐span Cable‐stayed Bridge Based on Shake Table Test and Nonlinear Model Updating

Study on FE Models in Elasto-Plastic Seismic Performance Evaluation of Steel Arch Bridge

Seismic Damage of Long Span Steel Tower Suspension Bridge Considering Strong Aftershocks

Time history analysis-based nonlinear finite element model updating for a long-span cable-stayed bridge

Digital twin-based collapse fragility assessment of a long-span cable-stayed bridge under strong earthquakes

Structural performance degradation of cable-stayed bridges subjected to cable damage: model test and theoretical prediction

Cluster computing‐aided model updating for a high‐fidelity finite element model of a long‐span cable‐stayed bridge

EARTHQUAKE-INDUCED COLLAPSE SIMULATION OF A SUPER LONG SPAN CABLE-STAYED BRIDGE BASED ON AN OPEN SOURCE FE PROGRAM

Failure Patterns and Ultimate Load-Carrying Capacity Evolution of a Prestressed Concrete Cable-Stayed Bridge: Case Study

Time-Progressive Dynamic Assessment of Abrupt Cable-Breakage Events on Cable-Stayed Bridges

SEISMIC VULNERABILITY ANALYSIS FOR LONG-SPAN CABLE-STAYED BRIDGE

Evaluation of long-service-life cable-stayed bridge strengthening schemes using a two-phase finite element model updating technology

Research on Collapse Process of Cable-Stayed Bridges under Strong Seismic Excitations

Mechanical State Assessment of In-Service Cable-Stayed Bridge Using a Two-Phase Model Updating Technology and Periodic Field Measurements

A Multiscale Finite Element Model Validation Method of Composite Cable-Stayed Bridge Based on Structural Health Monitoring System

Numerical failure analysis of a continuous reinforced concrete bridge under strong earthquakes using multi-scale models

Comparison of various procedures for progressive collapse analysis of cable-stayed bridges

Probabilistic deterioration model of high-strength steel wires and its application to bridge cables

Seismic fragility assessment of long-span cable-stayed bridges in China

Dynamic Assessment of Curved Cable-Stayed Bridge by Model Updating