Abstract:Ships have become an important source of SO2 emission in coastal areas with the rapid development of maritime transport. It is of great significance to develop a marine scrubber for reducing SO2 emission of ships. In this study, numerical simulation of a full-scale marine spray scrubber is conducted to investigate two-phase flow pattern and SO2 absorption process in the scrubber. A desulfurization model based on seawater absorbent is coupled into the simulation, which considers the mass transfer between phases and seawater aqueous phase chemistry simultaneously. A distribution ring is introduced in the scrubber to enhance the desulfurization performance of the scrubber. The result of simulation shows that the distribution ring can optimize effectively the distribution of gas-liquid phases and enhance the SO2 absorption. Under vertical condition, the desulfurization efficiency could be promoted approximate 6% after installing a distribution ring. The inclined condition resulting from the ship swinging could lead to the uneven distribution of droplets and an obvious decrease (8.7%) of desulfurization efficiency, whereas the desulfurization performance of the scrubber could be ensured with a distribution ring installed even under an inclined condition. Finally, a spray scrubber design scheme has been developed and successfully applied in the exhaust gas cleaning system (EGCS) of a container ship. Test result shows the outlet average value of SO2/CO2 can be reduced to 3.55. Meanwhile, the consistency of test data and calculation result indicates the applicability of the numerical model established for the simulation and optimization of the scrubber in industrial applications also. Implications: EGCS is an effective method to reduce SO2 emission of marine industry. However, different from a land desulfurization tower, the application of a spray scrubber in EGCS faces more problems due to the different application scenarios and complex sea conditions (inclined condition resulting from ships swinging and so on) during sailing. In this work, a numerical model capable of investigating physical and chemical phenomena in the scrubber simultaneously is established, which can produce a great amount of data for the operation instruction of EGCS and the design and optimization of the marine spray scrubber. The distribution ring is introduced in the marine spray scrubber to intensify the SO2 absorption and enhance the desulfurization performance of the scrubber under different working conditions.

Numerical Simulations of Airflow and Droplet Dispersion in a Horizontal Ammonia Scrubber

Optimizing Flow Field in an SCR System of a 600 MW Power Plant: Effects of Static Mixer Alignment Style

AMMONIA DISPERSION FROM MULTI-FLOOR VERSUS STANDARD SINGLE-FLOOR PIG PRODUCTION FACILITIES BASED ON COMPUTATIONAL FLUID DYNAMICS SIMULATIONS

Fluid Mixing Optimization Strategy of Catalytic Reactor for Marine SCR System

Numerical Investigation on Urea Particle Removal in a Spray Scrubber Using Particle Capture Theory

Numerical analysis of ammonia homogenization for selective catalytic reduction application

Validation Methods for the Ammonia Removal of an Air Scrubber on a Poultry House Using the Acid Use and the Process Water Nitrogen Balance

Efficient control system for low-concentration inorganic gases from a process vent stream: application of surfactants in spray and packed columns

Optimized design of flux chambers for measurement of ammonia emission after field application of slurry with full-scale farm machinery

Pilot-Scale Field Study for Ammonia Removal from Lagoon Biogas Using an Acid Wet Scrubber

Reduction of environmental chemicals, toxicity and particulate matter in wet scrubber device to achieve zero emissions

Numerical Simulation on Particulate Matter Emissions from a Layer House during Summer in Northeast China

CFD simulation and optimization of flow field and SO2 absorption in impinging stream scrubber

Numerical modelling of surface aeration and N2O emission in biological water resource recovery

Pig barns ammonia and greenhouse gas emission mitigation by slurry aeration and acid scrubber

Influence of ammonia-water fog formation on ammonia dispersion from a liquid spill

CFD Simulation with Enhancement Factor of Sulfur Dioxide Absorption in the Spray Scrubber

Numerical analysis of SO 2 removal characteristics in industrial flue gas desulfurization reactor by spray drying adsorption

Real-time quantification of emissions of volatile organic compounds from land spreading of pig slurry measured by PTR-MS and wind tunnels

Simulation investigation on marine exhaust gas SO2 absorption by seawater scrubbing

Experimental and numerical investigation of aerosol penetration through submerged gravel bed scrubber