Abstract:This article introduces a liquid desiccant fresh air processor. Its driving force is low-grade heat (heat obtained from 65 – 75°C hot water). Inside the processor, the air is dehumidified by the evaporative cooling energy of the indoor exhaust air. A four-stage structure is used to increase the efficiency of the combined sensible and latent heat recovery from the exhaust air. A mathematical model of the fresh air processor was set up using Simulink®. A liquid desiccant fresh air processor was constructed and tested for outside air conditions of 29.1 – 33.6°C, 13.7 – 16.7g/kg humidity ratio, and supply air conditions of 23.6 – 24.2°C, 7.4 – 8.6g/kg humidity ratio. The average measured COP f was 1.6 (cold production divided by latent heat removed) for the range of conditions tested. The corresponding average COP sys of the system including the regenerator was 1.3 (cold production divided by heat input). The detailed operating parameters of each part of the test unit were also measured. The test data was compared with the simulated performance. The characteristic coefficients (such as the volumetric mass transfer coefficient of the air-water evaporative cooling module, etc.) in the mathematical model were modified to calibrate the model output to the measured data. The calibrated simulation model was used to investigate the control strategy of the fresh air processor. The flow rate of the strong solution into the unit and the number of operation stages may be controlled separately or together to meet different indoor air requirements at different outdoor conditions. The hot water driven liquid desiccant air conditioning system was compared with a typical vapor compression system with an average COP of 4.5; the pump and fan power of the proposed system was 40% of the combined chiller, pump, and fan consumption. We achieved savings of over 30% of the power consumption compared with the traditional system under the designed outdoor air conditions.

Operation economic analysis of the fresh air handling unit with a latent heat storage subsystem

Comparative Study on Heating and Cooling Systems Integrated with Energy Storage

Technical And Economic Analysis On The Application Of Air Resource Heat Pump Unit

Annual performance experiments of an earth-air heat exchanger fresh air-handling unit in severe cold regions: Operation, economic and greenhouse gas emission analyses

Research on thermo-economic characteristics of a combined cooling, heating and power system based on advanced adiabatic compressed air energy storage

Constructing year-round energy-efficient fresh air handling unit with exhaust air heat recovery using multi-condition design

Simulation Study on Thermal Performance of Solar Coupled Air Source Heat Pump System with Phase Change Heat Storage in Cold Regions

Simulation and Experimental Analysis of A Fresh Air-Handling Unit with Liquid Desiccant Sensible and Latent Heat Recovery

Operation strategy optimization and economic analysis of composite energy system in large CBD

Scheme design and economic analysis of an office building’s cold and heat source system in hot-summer and cold-winter zone

Techno-Economic Evaluation of A Hybrid Hvac System Combining Double-Layer Pipe-Embedded External Wall and Multi-Stage Fresh Air Treatment

An Integrated Heat Recovery Air-Conditioning System (Ihracs) With Double-Heating Series-Wound Heat Pump Part 1: Scheme And Performance

A Direct Expansion Air Handling Unit Assisted by Liquid Desiccant for Different Sensible and Latent Heat Ratios

Techno-economic Analysis of a Refrigerated Warehouse Equipped with On-Shelf Phase Change Material for Cold Storage under Different Operating Strategies

Analysis of Energy Storage Based Strategy of Shifting Peak Operation of HVAC System

Design Method of Multi-Stage Air Treatment System with Circulating Air for High Efficiency in Year-Round Working Conditions

An Integrated Heat Recovery Air-Conditioning System (Ihracs) With Double-Heating Series-Wound Heat Pump Part 2: Comprehensive Assessment

Parametric assessment, multi-objective optimization and advanced exergy analysis of a combined thermal-compressed air energy storage with an ejector-assisted Kalina cycle

Thermo-Economic Assessments of a Novel Integrated Compressed Air Energy Storage System

Energy-Saving Operation Modes for a Heat Recovery Unit in Office Building

Thermodynamic Analyses Of A Micro Combined Cooling, Heating And Power System