Abstract:The commercial, CO2-intensive, propylene generation process is challenged by a low equilibrium yield, costly separation processes, and severe carbon deposition. Oxidative dehydrogenation (ODH) of propane offers a promising alternative; however, its potential is hampered by the undesirable over-oxidation of propylene to carbon oxides. Chemical looping approaches have been used, where a metal oxide reacts with propane and/or hydrogen – instead of O2 – which can avoid over-oxidation of the hydrocarbons to carbon oxides. Oxygen can then react with the reduced solid product to regenerate it to a stoichiometric oxide. However, solid chemical looping catalysts have a low oxygen carrying capacity, often less than 1 % in order to avoid cyclic deactivation, arising from changes to the lattice structure in each cycle. Herein, we report the use of molten metals as chemical looping catalysts, where the catalyst completely reduces to metallic form and melts each half-cycle. A high oxygen capacity is possible, and melting reduces lattice strain upon reduction. Thermodynamic calculations indicate that 21 individual metal candidates could be viable, and the most promising 14 are experimentally compared. Bi-Sn had the highest conversion, and 50-50 mol% Bi-Sn was supported in a fixed-bed reactor. This resulted in 22 % propylene yield at 600 °C, compared to a 20 % yield from the reference using borosilicate beads at the same temperature. After 10 cycles with separate flows of O2 followed by C3H8, totaling 37 hours on stream, no deactivation was observed. Enhanced propylene selectivity was observed using a 50-50 mol% Bi-Sn molten mixture, surpassing the performance of Bi or Sn alone, and leading to reduced carbon oxide formation. This improved selectivity occurred with both co-fed and pre-oxidized catalysts, suggesting the creation of a unique metal oxide selectively generating propylene while minimizing overoxidation to carbon oxides. Additionally, the oxygen conversion over the Bi-Sn alloy was lower than over Bi or Sn separately when co-feeding propane and oxygen. Selectivity to cracked products was high for most of the active melts tested, especially above 550 °C.

Molybdenum-based oxygen carrier for chemical looping oxidative dehydrogenation of isobutane

Oxygen carrier prepared by solvent-free grinding and biomass based oxygenates for chemical looping oxidative dehydrogenation of isobutane

Modulating Lattice Oxygen in Dual-Functional Mo-V-O Mixed Oxides for Chemical Looping Oxidative Dehydrogenation

Use of a high-entropy oxide as an oxygen carrier for chemical looping

Core-shell Na2WO4/CuMn2O4 oxygen carrier with high oxygen capacity for chemical looping oxidative dehydrogenation of ethane

Micro-structure change and crystal-structure modulated of oxygen carriers for chemical looping: Controlling local chemical environment of lattice oxygen

Heteroatom-doping regulated Mg6MnO8 for improving C2+ hydrocarbons during chemical looping oxidative coupling of methane

Engineering Specific Mo–O Bond Stretching to Activate Lattice Oxygen in V-Doped Bi2MoO6 for Enhanced Oxidative Dehydrogenation of 1-Butene

A Novel Ni–MoCxOy Interfacial Catalyst for Syngas Production Via the Chemical Looping Dry Reforming of Methane

Enhanced performance of chemical looping methane oxidative coupling by the synergistic effect of TiO2 doped Na2WO4/Mn2O3/SiO2 oxygen carriers

Enhanced performance of LaFeO3 oxygen carriers by NiO for chemical looping partial oxidation of methane

Enhanced performance of the CeO2MgO oxygen carrier by NiO for chemical looping CO2 splitting

Synergistic Effects of Binary Oxygen Carriers During Chemical Looping Hydrogen Production

Chemical looping methanol oxidation using supported vanadium phosphorous oxide carriers for formaldehyde production

Mn-Fe-Al-O Mixed Spinel Oxides As Oxygen Carrier for Chemical Looping Hydrogen Production with CO2 Capture

Uniformly dispersed NiFeAlO 4 as oxygen carrier for chemical looping steam methane reforming to produce syngas

Binary Li/Na tungstates modified Mg6MnO8 as redox catalysts for enhanced performance of chemical looping oxidative dehydrogenation of ethane

Degradation analysis of mixed ionic-electronic conductor-supported iron-oxide oxygen carriers for chemical-looping conversion of methane

Propane Oxidative Dehydrogenation Catalyzed by Molten Metal Alloys

From lab to industry: Scaling-up Fe-Ni bimetallic nano oxygen carrier for mid-temperature methane chemical looping reforming

Lattice oxygen behaviors of Mn-based catalytic oxygen carriers and sustainable oxidative coupling of methane in chemical-looping scheme