Abstract:Four different types of stent geometries were proposed for cardiovascular applications to improve mechanical properties of poly‐L‐lactic acid bioresorbable stents. Five key mechanical tests were evaluated, including radial strength, crimping profile, flexibility, elastic recoil, and foreshortening. M2 and M3 would be a suitable option for employing poly‐L‐lactic acid bioresorbable stents: M2 with high flexibility and sufficient radial strength would be preferred for complex lesions, and M3 advantageous in radial elastic recoil would be an optimum selection for mild target sites. Background Poly‐L‐lactic acid (PLLA) is one of the representative polymeric materials serving as bioresorbable stents (BRS) for cardiovascular disease due to its proper biodegradation, high biocompatibility, and adequate mechanical properties among polymer candidates for BRS. However, PLLA BRS as cardiovascular stents also have limitations because their mechanical properties including low radial strength and high elastic recoil are inferior to those of metallic‐based BRS stents. Methods In the study, we developed and manufactured distinct and novel types of stent geometries for investigating mechanical properties of thin‐walled PLLA BRS (110 μm) for cardiovascular applications. Five key mechanical tests, including radial strength, crimping profile, flexibility, elastic recoil, and foreshortening were performed through a comprehensive analysis. In addition, we applied the finite element method for further validation and insight of mechanical behaviors of the PLLA BRS. Results Results revealed that Model 2 had advantages in high flexibility as well as radial strengths, which would be a proper option for complex and acutely curved lesions. Model 3 would be an optimum selection for stent placement in mild target site due to its strength in minimum elastic recoil. Even though Model 4 showed the highest radial strength, finite element simulation showed that the geometry caused higher maximum stress than that of Model 2 and Model 3 during the crimping process. Model 1 showed the most vulnerable geometry among the tested models in both in vitro and finite element analysis. Conclusion Such data may suggest potential guidance in regard to understanding the mechanical behaviors of PLLA BRS as not only applicable cardiovascular but also peripheral and intracranial stents.

The Effect of Intrinsic Characteristics on Mechanical Properties of Poly(l-Lactic Acid) Bioresorbable Vascular Stents.

Evaluation of Mechanical Properties of Poly( L ‐lactic Acid) Braided Stents with Axial Stiffeners

Computational and Experimental Investigation into Mechanical Performances of Poly-L-Lactide Acid (PLLA) Coronary Stents

Key Factors of Mechanical Strength and Toughness in Oriented Poly(l-lactic Acid) Monofilaments for a Bioresorbable Self-Expanding Stent.

Influence of Parameters on Mechanical Properties of Poly (L-Lactic Acid) Helical Stents.

Effects of Constraint Between Filaments on the Radial Compression Properties of Poly (L-Lactic Acid) Self-Expandable Braided Stents

Improved Mechanical Properties of Poly( L ‐lactic Acid) Stent Coated by Poly( D , L ‐lactic Acid) and Poly( L ‐lactic‐co‐glycolic Acid) Biopolymer Blend

A Study of the Radial and Bending Performance for Poly (l‐lactic Acid) Braided Stents with Innovative Runners

Mixed-braided Stent: an Effective Way to Improve Comprehensive Mechanical Properties of Poly (L-Lactic Acid) Self-Expandable Braided Stent.

A hazardous boundary of Poly(L-lactic acid) braided stent design: Limited elastic deformability of polymer materials

Evaluation of Resistance to Radial Cyclic Loads of Poly(l-Lactic Acid) Braided Stents with Different Braiding Angles.

Structural Optimization and Finite Element Analysis of Poly-L-lactide Acid Coronary Stent with Improved Radial Strength and Acute Recoil Rate.

Regulating mechanical performance of poly (l-lactide acid) stent by the combined effects of heat and aqueous media

Design and characterization of PLLA stents with Z-structure

Development of Three-Dimensionally Printed Vascular Stents of Bioresorbable Poly(l-Lactide-co-caprolactone).

Preparation of a poly(L-lactic acid) braided stent with high radial force

A biodegradable polymer stent with high radial performance: Potential for treatment of portal vein stenosis

Evaluation of Poly (L-Lactic Acid) Monofilaments with High Mechanical Performance in Vitro Degradation

Evaluation of the Stress Relaxation Behavior of Poly (l‐lactic Acid) Self‐expanding Braided Stents

A comparative in vitro study of distinct and novel stent geometries on mechanical performances of poly‐L‐lactic acid cardiovascular stents

Critical Parameters for the Properties of Poly (l‐Lactic Acid) Mixed‐Braided Stent: Monofilaments Diameter and Friction Coefficient