Abstract:This paper is to investigate the inertial dynamics of virtual-synchronous-controlled (VSynC) doubly fed induction generator (DFIG)-based wind turbines (WTs). VSynC, different from the conventional synchronization method based on phase-locked-loop (PLL) synchronizing technique, makes DFIG-based WT synchronize with power grid via the active power control (APC), and thus provide the desired inertial support to power grid. Further, an effective approach for describing the inertial dynamics of DFIG-based WT with VSynC is proposed by establishing the WT's electromechanical motion equation. The approach synthetically considers the impacts of the WT's different controller parameters, operating points, and, in particular, the variations of mechanical power caused by the rotational speed or pitch angle changes during the inertial response period. It also makes the essential of DFIG-based WT's inertia clearer, which, as a matter of fact, is controllable and manifests frequency-dependent characteristics, and noticeably differs from the fixed inertia time constant featured in synchronous generator (SG). The impacts of different controller parameters and operating points on single WT's frequency response characteristics are studied. Simulated results also validate the superiority of VSynC on inertial support capability and operation stability to the typical PLL-based vector control (VC), especially for weak grid conditions. Finally, the frequency response on wind power plant (WPP) level is initially explored and further research to improve VSynC is discussed.

Nonlinear Virtual Inertia Control of WTGs for Enhancing Primary Frequency Response and Suppressing Drivetrain Torsional Oscillations

Decentralized Nonlinear Control of Wind Turbine with Doubly Fed Induction Generator

A Virtual Inertia Coordinated Control Scheme of PMSG-based Wind Turbines in Weak Grids

Virtual Synchronous Control Using SOGI for Standalone DFIG-Based Wind Turbines with Unbalanced and Nonlinear Loads

Research on design and simulation experiment of virtual inertia controller for doubly fed induction generator

Influence of Wind-Turbine-Generator Power Control on the Performance of a Virtual Synchronous Machine

Multi-Objective Adaptive Inertia and Droop Control Method of Wind Turbine Generators

Research on the VIC-Induced Resonance of the Grid-Following PMSG-Based Wind-Driven System

Adaptive Virtual Inertia Control Based on Nonlinear Model Predictive Control for Frequency Regulation

On Inertial Dynamics of Virtual-Synchronous-Controlled DFIG-Based Wind Turbines

Rotor Inertia Adaptive Control and Inertia Matching Strategy Based on Parallel Virtual Synchronous Generators System

Shafting Dynamic Analysis of the PMSG-based Wind-driven System Considering Virtual Inertia Control

Torque Oscillation Suppression of DFIG-based Wind Turbines under Unbalanced and Distorted Grid Voltage Conditions

Improved Adaptive Inertia Control of VSG for Low Frequency Oscillation Suppression

Control of PMSG-Based Wind Turbines for System Inertial Response and Power Oscillation Damping

Robust Nonlinear Controller to Damp Drivetrain Torsional Oscillation of Wind Turbine Generators

Nonlinear Subsynchronous Oscillation Damping Controller for Direct-Drive Wind Farms with VSC-HVDC Systems

Influence of inertia response control of wind turbine with doubly fed induction generator on drive train torsional vibration

Event-Triggering Virtual Inertia Control of PV Systems with Power Reserve

Inertia Response Control of Self-synchronous Voltage Source Doubly-fed Wind Turbines in the Whole Wind Speed Range

Improved Virtual Inertia of PMSG-Based Wind Turbines Based on Multi-Objective Model-Predictive Control