Abstract:For large-scale offshore wind power integration to main grids over a long distance, the VSC–HVDC transmission is a typical way. However, the asynchronous characteristic of HVDC link leads to the frequency decouple of the offshore grid and the main grid, i.e., the offshore grid has little or no inertia support for the main grid. The high level penetration of wind energy makes the main grid an “inertia-less” system and impairs the overall stability of the system. This paper proposes a new coordinated control strategy which uses the electrical energy stored in the DC capacitors and the kinetic energy stored in wind turbine rotors to emulate the inertia of synchronous generators. By this control strategy, the DC link capacitors release or absorb energy following the droop DC voltage control of the grid side VSC (GSVSC), and the wind farm VSC (WFVSC) changes its output frequency according to the DC voltage. Thus, an artificial coupling of the frequencies of the two-side AC systems is obtained without remote communication. According to the WFVSC’s output frequency, the wind turbine power controller alters its power reference, and the wind turbine speed changes. Thus, the kinetic energy stored in wind turbine rotors is absorbed or released. As a result, the wind turbine is utilized to keep the main grid frequency stable. Based on the doubly fed induction generator (DFIG) wind turbine, this paper analyzes the influence of different additional power controllers and different control parameters of the proposed control strategy on the inertia time constant. Within the permissible range of the DC voltage variation, the proposed control strategy can provide a wide range of inertia time constant, which improves the overall stability of the main grid system. Simulation results of three operation conditions, i.e., sudden load changes, variation of the wind speed, and AC system faults, validated the effectiveness of the proposed coordinated control strategy.

Inertia Response Control of Self-synchronous Voltage Source Doubly-fed Wind Turbines in the Whole Wind Speed Range

A Virtual Inertia Coordinated Control Scheme of PMSG-based Wind Turbines in Weak Grids

Research on design and simulation experiment of virtual inertia controller for doubly fed induction generator

Multi-Timescale Control of Variable-Speed Wind Turbine for Inertia Provision

Improved Virtual Inertia of PMSG-Based Wind Turbines Based on Multi-Objective Model-Predictive Control

Enabling Inertial Response of Variable-Speed Wind Turbines: A Survey and New Perspectives

Rotor Inertia Adaptive Control and Inertia Matching Strategy Based on Parallel Virtual Synchronous Generators System

Understanding Inertial Response of Variable-Speed Wind Turbines by Defined Internal Potential Vector

Data-Driven Virtual Inertia Control Method of Doubly Fed Wind Turbine

Adaptive Inertia VSG Control Method Involving Power and Power Change Rate

Research on multi-energy cooperative participation of grid frequency inertia response control strategy for energy storage type doubly-fed wind turbine considering wind speed disturbance

Comparative Study on Primary Frequency Control Schemes for Variable‐speed Wind Turbines

Virtual Inertia Control and Short-Term Primary Control for PMSG-Based Wind Turbine Using Supercapcitor

Inertia Control of the Grid Connected Doubly Fed Induction Generator Based Wind Farm with Drive-Train Torsion Active Damping

A Frequency Response Strategy for Variable Speed Wind Turbine Based on a Dynamic Inertial Response and Tip-Speed Ratio Control

Coordinated Control Parameter Setting of DFIG Wind Farms with Virtual Inertia Control

Inertial Response Control Strategy of Wind Turbine Based on Variable Universe Fuzzy Control.

Enabling and Evaluation of Inertial Control for PMSG-WTG Using Synchronverter with Multiple Virtual Rotating Masses in Microgrid

Virtual Inertia Control of Grid-Connected Wind Farms

Inertia Characteristics Analysis of DFIG-Based Wind Turbines with Virtual Synchronous Control in Different Operation Areas

Coordinated control of wind farm and VSC–HVDC system using capacitor energy and kinetic energy to improve inertia level of power systems