Abstract:Surface roughness with topography modeling is one of the most important indicator for evaluating the surface quality in the machining process. This paper establishes a 3D surface roughness prediction model for bevel milling by considering the factors such as milling geometry, motion trajectory, and elastic-plastic deformation. Most of the existing roughness prediction models for bevel milling are based on regression models combined with multiple methods, which makes these models cannot well applied in complicated applications. Aiming at the change of contact area between tool and workpiece in bevel milling, the concept of effective cutting edge is introduced to establish a surface topography simulation model. Furthermore, this model fully considered the milling method, machine perpendicularity, and elastic-plastic deformation. Combined with the international standard of three-dimensional surface roughness, the roughness is predicted according to the residual height of each point on the surface topography. In order to verify the model accuracy and to explore the influence of process parameters on roughness and milling force in bevel and plane milling, two orthogonal experiments are designed in this paper. The experimental results show that the surface topography simulation results are consistent with the actual shape characteristics. The average relative error of roughness prediction is 7.93%, and the minimum is only 0.84%. In addition, the experimental results show that the two factors that have a great influence on the roughness are the spindle speed and feed rate, while the cutting depth and step distance greatly impact on the milling force.

A Novel 3D Surface Topography Prediction Algorithm for Complex Ruled Surface Milling and Partition Process Optimization

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

Geometry Simulation and Evaluation of the Surface Topography in Five-Axis Ball-End Milling

Study on Analytical Model of Surface Roughness Prediction in NC Machining

A novel method to predict surface topography in robotic milling of directional plexiglas considering cutter dynamical displacement

A novel surface topography prediction method for hybrid robot milling considering the dynamic displacement of end effector

Modelling and Optimization of Machined Surface Topography in Ball-End Milling Process

Topography prediction at boundaries between sub-regions in the 5-axis milling of Plexiglas based on dimension reduction method

An accurate 3D surface topography model for single-point diamond turning

3D bevel surface topography analysis and roughness prediction by considering the cutter-workpiece dynamic interaction

A feedback toolpath generation method for compound trimmed surface with machine’s dynamic characteristics confined

Model for Surface Topography Prediction in Cylinder Turning

A generic uniform scallop tool path generation method for five-axis machining of freeform surface.

Characterization of 3D surface topography in 5-axis milling

3D Surface Topography Prediction in the Five-Axis Milling of Plexiglas and Metal Using Cutters with Non-Uniform Helix and Pitch Angles Combining Runout

A Novel Method of Efficient Machining Error Compensation Based on Nurbs Surface Control Points Reconstruction

Modeling and simulation of surface topography in five-axis ball end milling

The prediction of 3D surface topography in a high-speed micro-milling process with aerostatic spindle

An integrated machine-process-controller model to predict milling surface topography considering vibration suppression

Prediction of Surface Topography in Robotic Ball-End Milling Considering Tool Vibration

Multi-scale prediction of the geometrical deviations of the surface finished by five-axis ball-end milling