Abstract:This article investigated the heat transfer performance and flow friction of molten salts in turbulent tube flow, where four salts including Hitec, Solar Salt, NaF-NaBF4, and FLiNaK were studied. A computational model was developed to analyze the flow and heat transfer features of the salts in the tube, and experiments were conducted to test the heat transfer performance of a representative salt Hitec in the tubes of a salt-oil heat exchanger. Comparison of simulation results with the experimental data shows that the average errors are smaller than +/- 4%, which validates the simulation model. Based on the model, firstly the influences of heat flux uniformity at the tube outer wall were examined. The results show that the non-uniform wall flux can lead to local high-temperature region but influences little on the flow friction coefficient and the heat transfer performance. Then, the model was utilized to investigate the friction and heat transfer features of the salts under broad ranges of the temperature and the velocity. Comparisons of the simulated heat transfer results with Hansen's, Sider-Tate's and Gnielinski's correlations show that the largest errors can reach +25%, +13% and -15%, respectively. Furthermore, the errors between the simulated friction coefficients and the Filonenko's correlation are smaller than +/- 2%, which indicates that this correlation is suitable for predicting the friction of the salts. Finally, to predict the heat transfer performance more accurately for these representative salts, a new correlation was developed. It was found that the errors between all simulation results and the proposed correlation are smaller than +/- 5%, while the corresponding values for 80% experiment data of three salts are also lower than +/- 5%. The current study can offer beneficial results and correlation for the applications of molten salts in energy systems. (C) 2019 Elsevier Ltd. All rights reserved.

Convective Heat Transfer Performance of Solar Salt in an Inclined Circular Tube

Experimental Investigation on the Heat Transfer Performance of Molten Salt Flowing in an Annular Tube

Experimental Investigation of Heat Transfer Performance of Solar Salt and Subcritical Water/Steam

Experimental Study of the Distillation Process in a Tilted Cavity

A Practical Method to Evaluate the Thermal Efficiency of Solar Molten Salt Receivers

Convective Heat Transfer of High Temperature Molten Salt Flowing Across Tube Bundles of Steam Generator in a Solar Thermal Plant

An Experimental Study on the Heat Transfer Performance of a Prototype Molten-Salt Rod Baffle Heat Exchanger for Concentrated Solar Power

Study on the flow and heat transfer characteristics of hitec salt in solar vacuum collector tube

Numerical and Experimental Study on Heat Transfer and Flow Features of Representative Molten Salts for Energy Applications in Turbulent Tube Flow

Experimental investigation on turbulent heat transfer characteristics of molten salt in a shell-and-tube heat exchanger

Experimental analysis of heat transfer process in salt production by solar energy

Heat-Transfer Characteristics of Liquid Sodium in a Solar Receiver Tube with a Nonuniform Heat Flux

Experimental study on forced convection heat transfer of KNO3–Ca(NO3)2 + SiO2 molten salt nanofluid in circular tube

Experimental research on heat transfer characteristic of HITEC molten salt in evacuated tube solar collector

Numerical Study on Heat Transfer and Frictional Resistance of Two Types of Molten Salts in Straight Channels and Supercritical Carbon Dioxide in Airfoil Channels

Flow and mixed convection heat transfer of Hitec salt in multi-sided heating pipes

Unveiling Impacts of Heat Flux Distribution on Forced Convection in Horizontal Evacuated Tubes

Numerical Study on Thermal Performance and Thermal Stress of Molten Salt Receiver Tube Based on Induction Heating

Convective Heat Transfer of Molten Salt in the Shell-and-tube Heat Exchanger with Segmental Baffles

Thermal performance analysis of molten salt based on a novel experimental rig

Parametric Study on Integrated Thermal and Mechanical Performance of Molten Salt Receiver for Solar Tower Power Plant