Abstract:Heat transfer and thermal performance of U-tube molten salt steam generator was experimentally reported with inlet water flow rate of 22.4-89.6 L/h, water temperature of 20-100°C, salt flow rate of 1-2.2 m3/h and salt temperature of 306.5-395.3°C. The heat transfer mechanism of U-tube molten salt steam generator was experimentally revealed, and overall heat transfer coefficient was influenced by salt convection and water boiling, while thermal efficiency was determined by heat absorption and heat loss. As inlet water flow rate rose, overall heat transfer coefficient and thermal efficiency rose initially and decreased afterwards, while they dropped with inlet water temperature rising as subcooling boiling changed to saturation boiling. As salt temperature increased, salt convection was enhanced, while boiling heat transfer coefficient rose initially and dropped afterwards with superheat rising, so overall heat transfer coefficient and thermal efficiency rose initially and dropped afterwards. As salt flow rate rose, overall heat transfer coefficient under low salt temperature rose for boiling heat transfer coefficient increment, and that under high salt temperature first rose and then dropped as boiling curve had maximum heat flux, while thermal efficiency dropped as heat loss and wall temperature increasing. Molten salt heat transfer outside U-tube bundle was remarkably higher than that inside tube, while it was lower than that outside straight tube bundle. Heat transfer correlation of salt outside U-tube bundle was first proposed, and that had good agreement with experiment data with maximum deviation 7.8%. The heat transfer mechanism and correlation in present work can provide reliable basis for design and application of U-tube molten salt steam generator.

Convective Heat Transfer of High Temperature Molten Salt Flowing Across Tube Bundles of Steam Generator in a Solar Thermal Plant

Experimental Investigation on the Heat Transfer Performance of Molten Salt Flowing in an Annular Tube

Experimental Investigation on the Shell-Side Heat Transfer Performance of Molten Salt Steam Generator

Experimental Investigation of Heat Transfer Performance of Solar Salt and Subcritical Water/Steam

Heat Transfer Performance of U-tube Molten Salt Steam Generator

Convective Heat Transfer Characteristics of High Temperature Molten Salt Steam Generator

Numerical Simulation Study on Flow Heat Transfer and Stress Distribution of Shell-and-Tube Superheater in Molten Salt Solar Thermal Power Station

Experimental Investigation of Heat Transfer in Coiled Tube Type Molten Salt Steam Generator

Convective Heat Transfer of Molten Salt in Receiver Tube with Axially and Circumferentially Non-Uniform Heat Flux

Heat Transfer and Thermal Performance of Two-Stage Molten Salt Steam Generation System

HEAT TRANSFER CHARACTERISTICS OF MOLTEN SALT FLOWING IN STEAM GENERATOR

Experimental investigation on turbulent heat transfer characteristics of molten salt in a shell-and-tube heat exchanger

Thermal Performances of Molten Salt Steam Generator

Experimental Study of Heat Transfer Enhancement for Molten Salt with Transversely Grooved Tube Heat Exchanger in Laminar-Transition-turbulent Regimes

Experimental heat transfer research on molten salt receiver tube of high temperature and high flux

The Heat Transfer Characteristics of Molten Salts Flowing in a Vertical Concentric Duct

Convective heat transfer of molten salt outside the tube bundle of heat exchanger

Experimental Investigation on the Heat Transfer Characteristics of Molten Salt to Subcooled Boiling Water

Heat Transfer Enhancement and Performance of the Molten Salt Receiver of a Solar Power Tower

Convective heat transfer of high temperature molten salt in transversely grooved tube

Thermal Performances of Two Stage Molten Salt Steam Generator