Abstract:In a solar power tower system, the concentrating and collecting subsystem, including the heliostat field and the receiver, contains some of the most costly and technically challenging components. Many types of solar receivers make up the solar power tower system. Among them, the cavity molten salt receiver has been widely applied due to its lower heat loss. The accurate simulation of the coupled heat transfer process in the cavity receiver and the prediction of receiver performance are of great importance for the receiver design and safe operation. The solar flux distribution on cavity interior surfaces is extremely non-uniform, which has great effect on the receiver thermal performance. Taking the non-uniform solar flux distribution into consideration, the photon-thermal conversion process is simulated integrally in this paper. A hybrid simulation approach, which couples Monte Carlo ray tracing and Gebhart methods, is applied to investigate the complete solar radiation transfer process in the solar power tower system with a cavity receiver and obtain the non-uniform solar flux distribution. On this basis, the coupled photon-thermal conversion process in the molten salt cavity receiver is simulated. The effects of the fluid flow layout on the receiver performance under the non-uniform solar flux distribution are particularly revealed. Also, the variation of the receiver performance with time is analyzed in detail. The results show that the solar flux distribution on the interior surfaces of the cavity receiver is extremely non-uniform, under which the molten salt flow layout has great effects on the receiver performance. In the case of flow layout that the cold molten salt flows into the receiver in the high-flux area, the temperatures of both the absorber wall and the molten salt increase rapidly along the flow path. The temperature of the whole absorber wall is relatively high, which leads to greater heat loss and less amount of hot molten salt, and even seriously, “heat transfer deterioration” near the outlet of the receiver. When the cold molten salt flows into the receiver in the low-flux area, the temperature of both the absorber wall and the molten salt increase slowly along the flow path. The temperatures of the whole absorber wall is relatively low, which results in less heat loss and larger amount of hot molten salt. Although the shape of the solar flux distribution on the interior surfaces varied greatly with time, the evolutions of the molten salt (absorber wall) temperature at different time display similar variation tendency along the flow path. Moreover, the reflective loss varies with time greatly, while the heat loss varies with time slightly.

Heat Transfer Enhancement and Performance of the Molten Salt Receiver of a Solar Power Tower

A Practical Method to Evaluate the Thermal Efficiency of Solar Molten Salt Receivers

Improving the Heat Transfer Performance of the Tower Molten Salt Solar Receiver with the Novel Folded Flow Tubes

Parametric Study on Integrated Thermal and Mechanical Performance of Molten Salt Receiver for Solar Tower Power Plant

Experimental and Numerical Evaluation of a Lab-Scale External Solar Receiver

Modeling and dynamic simulation of receiver in a solar tower power station

Coupled Optical and Thermal Performance of a Fin-Like Molten Salt Receiver for the Next-Generation Solar Power Tower

Numerical and experimental study on thermal performance and thermal stress of molten salt receiver during preheating

Thermal Performance of Steam Receiver in Tower-Type Solar Power Plants

Experimental Investigation on the Heat Transfer Performance of Molten Salt Flowing in an Annular Tube

Numerical Study on Thermal Performance and Thermal Stress of Molten Salt Receiver Tube Based on Induction Heating

Integrated Numerical Study on the Coupled Photon-Thermal Conversion Process in the Central Solar Molten Salt Cavity Receiver

Numerical Investigation on the Thermal Performance of Molten Salt Cavity Receivers with Different Structures

Convective Heat Transfer of High Temperature Molten Salt Flowing Across Tube Bundles of Steam Generator in a Solar Thermal Plant

Coupled optical and thermal simulation of the thermal performance of a 50 MWe external cylindrical solar receiver

Negative Thermal-Flux Phenomenon and Regional Solar Absorbing Coating Improvement Strategy for the Next-Generation Solar Power Tower

Thermal Characteristics of Grid Flat-Plate Heat Receiver in a Solar Power-Tower System

Heat transfer and mechanical characteristics of the absorber in solar photo-thermal power generation system

Concentrated Solar Power Tower Systems Coupled Locally with Spectrally Selective Coatings for Enhancement of Solar-Thermal Conversion and Economic Performance

Dynamic Thermal Transport Characteristics of a Real-Time Simulation Model for a 50 MW Solar Power Tower Plant

Conceptual Design of Porous Volumetric Solar Receiver Using Molten Salt As Heat Transfer Fluid