Abstract:Molten corium-concrete interaction (MCCI) is an important ex-vessel phenomenon that could happen during the late phase of a hypothetical severe accident in a light water reactor. When the molten corium, which is generally comprised of UO2, ZrO2 and metals such as zircalloy and stainless steel, is discharged into a dry reactor cavity, a stratified molten pool configuration with two immiscible oxidic and metallic phases can be expected to form and lead to MCCI. Compared to a homogenous oxidic molten pool configuration, the metallic phase in the stratified molten pool might influence the crust formation on the corium-concrete interface and consequently cause different concrete ablation behavior to evaluate MCCI progression concerning containment failure. In terms of this issue, past experimental studies, such as COMET-L, VULCANO VBS and MOCKA test series, have been carried out to investigate the influence of such oxidic and metallic stratified pool configuration on MCCI. The experimental results have shown that the metallic phase can have a significant impact on the axial and radial ablation kinetics that could influence the ablation patterns of reactor pit. As regards numerical studies, past numerical modeling of MCCI was generally based on Eulerian methods and simplified empirical approach to simulate solid/liquid phase change and evolving of corium/crust/concrete interface. Such modeling might be efficient but have shown deficiencies and inadequacies due to its Eulerian and empirical nature, which has suggested a necessity to seek for a more mechanistic approach for modeling of MCCI. In this sense, Moving Particle Semi-implicit (MPS) method is considered suitable for MCCI analysis for its advantages of tracking interfaces and modeling phase change accurately as a Lagrangian particle method. In the present study, a three-dimensional (3-D) numerical study has been performed to simulate COMET-L3 test carried out by KIT with a stratified molten pool configuration of simulant materials with improved MPS method. Solid/liquid phase change was simulated with types of solid and liquid particles with thermal and physical properties including temperature and solid fraction, which enabled tracking of the solid/liquid status of each particle to achieve accurate free surface and corium/crust/concrete interface capturing. The heat transfer between corium/crust/concrete was modeled with heat conduction between particles. Moreover, the potential influence of the siliceous aggregates was also investigated by setting up two different case studies since there was previous study indicating that siliceous aggregates in siliceous concrete might contribute to different axial and radial concrete ablation rates. The simulation results have indicated that metal melt as corium in MCCI can have completely different characteristics regarding concrete ablation pattern from that of oxidic corium, which needs to be taken into consideration when assessing the containment melt-through time in severe accident management.

Three-dimensional Numerical Study on the Effect of Sidewall Crust Thermal Resistance on Transient MCCI by Improved MPS Method

Three-Dimensional Numerical Study on Pool Stratification Behavior in Molten Corium-Concrete Interaction (MCCI) with MPS Method

NUMERICAL SIMULATION OF CONCRETE ABLATION AND CORIUM COOLING FOR MOLTEN CORIUM-CONCRETE INTERACTION (MCCI)

Experimental Study on Molten Corium-Concrete Interaction with Simulant Metal and Oxide

Development and Application of MOQUICO Code to Study Molten Corium-Concrete Interaction

Development and Verification of Molten Corium–concrete Interaction Code

Experimental and Numerical Investigation on Characteristics of MCCI with Exothermic Thermite

Numerical Study on Cladding Melting and Melt Migration Behavior in Lead-Bismuth Coolant Using the Improved MPS Method

Numerical Analysis of Melt Migration and Solidification Behavior in LBR Severe Accident with MPS Method

Study on Melt Stratification and Migration in Debris Bed Using the Moving Particle Semi-Implicit Method

Numerical Analysis of the Melt Behavior in a Fuel Support Piece of the BWR by MPS

Development of an MPS Code for Corium Behavior Analysis: 3D Alloy Melting

Investigation on Influence of Crust Formation on VULCANO VE-U7 Corium Spreading with MPS Method

A Thermal Approach for Modeling Concrete Ablation During Molten Corium–Concrete Interaction

Numerical Analysis of the Corium Behavior Within the Fuel Support Piece by Mps

Numerical Study on the Heat Transfer Characteristics of Live-L4 Melt Pool with A Partial Solidification Process

Numerical Simulation of Zircaloy-Water Reaction Based on the Moving Particle Semi-Implicit Method and Combined Analysis with the MIDAC Code for the Nuclear-Reactor Core Melting Process

Research on the Influence of Chemical Reaction Model over MCCI Heat Transfer Process

Numerical simulation on melting and solidification based on lagrangian approach

Transient Heat Transfer and Crust Evolution During Debris Bed Melting Process in the Hypothetical Severe Accident of HPR1000

2d Mps Method Analysis Of Ecokats-V1 Spreading With Crust Fracture Model