Abstract:Carbon capture, as a core technology for mitigating greenhouse gas emissions, the greatest challenge is the balance between separation performance and energy consumption. This study seeks to evaluate and screen the separation performance and energy consumption of four typical adsorbents (13X, Mg-MOF-74, activated carbon, and Lewatit VP OV 1065) in vacuum temperature swing adsorption (VTSA) and vacuum swing adsorption (VSA) through optimization approach, which will support in-depth research and decision-making on adsorption processes. A non-isothermal non-adiabatic numerical model was carried out to describe a novel 4-bed 10-step VTSA cycle developed on an exchange type adsorption unit (ETAU), and the model was validated by binary breakthrough and temperature swing experiments. A 4-bed 10-step VSA cycle was in turn established and investigated. Parametric analysis of the two cycles was performed by varying the operating variables including feed gas flow rate, recycle time, and purge-to-feed ratio. Process optimization of the multiplicative fraction evaluation function, simultaneously considering purity, recovery, and productivity, was achieved using a dual convergence algorithm. Results showed that all four adsorbents could achieve more than 90 % purity and recovery on the VTSA process employing the ETAU for post-combustion carbon capture, and the separation performance was substantially superior to that of the VSA cycle. Mg-MOF-74 obtained a CO 2 product with 97.90 % purity, 98.48 % recovery, and 5.48 mol/kg ads /hr productivity at a desorption temperature of 383.15 K; it has a specific heat consumption of 1.45 GJ th /ton and a specific power consumption of 0.55 GJ el /ton. The total energy consumption of 13X was slightly lower than that of amine adsorbents, giving 95.00 % purity, 97.60 % recovery, and 1.91 mol/kg ads /hr productivity. Relatively low desorption temperature is expected to introduce ultra-low-grade waste heat for partial heat source substitution, contributing to the energy sustainability of adsorption carbon capture technology.

Energy and Cost Estimates for Separating and Capturing CO2 from CO2/H2O Using Condensation Coupled with Pressure/vacuum Swing Adsorption

Process optimization of CO2membrane and cryogenic hybrid separation

Modelling and Simulation of Two-Bed PSA Process for Separating H2 from Methane Steam Reforming

Thermodynamic Exploration of Two-Stage Vacuum-Pressure Swing Adsorption for Carbon Dioxide Capture

Systematic Design and Optimization of a Membrane–Cryogenic Hybrid System for CO2 Capture

Performance Exploration of Temperature Swing Adsorption Technology for Carbon Dioxide Capture

Elevated Temperature Pressure Swing Adsorption Process for Reactive Separation of CO/CO2 in H2-rich Gas

Solar-assisted Temperature Vacuum Swing Adsorption for Direct Air Capture: Effect of Relative Humidity

System And Processes Of Pre-Combustion Carbon Dioxide Capture And Separation

Techno-economic Analysis on Temperature Vacuum Swing Adsorption System Integrated with Pre-Dehumidification for Direct Air Capture

How much can novel solid sorbents reduce the cost of post-combustion CO2 capture? A techno-economic investigation on the cost limits of pressure-vacuum swing adsorption

Simultaneously enhancing H2 recovery and CO2 captured pressure during the hydrogen purification process of medium-temperature shifting gas by coupled wet CO2 separation-PSA technology: From laboratory to industrial scale test

Thermodynamic Study on Two Adsorption Working Cycles for Direct Air Capture

CFD Simulation for Separation of Carbon Dioxide-Methane Mixture by Pressure Swing Adsorption

Simulation of CO2 capture from natural gas by cyclic pressure swing adsorption process using activated carbon

Integrated Gasification Combined Cycle with Carbon Dioxide Capture by Elevated Temperature Pressure Swing Adsorption

Correlations Between Adsorbent Characteristics and the Performance of Pressure Swing Adsorption Separation Process

Separation of $CH_4/CO_2/N_2$ Mixture by Pressure Swing Adsorption

Modeling and optimal design of multicomponent vacuum pressure swing adsorber for simultaneous separation of carbon dioxide and hydrogen from industrial waste gas

Process design and adsorbent screening of VSA and exchanger type VTSA for flue gas CO 2 capture

Adsorption for efficient low carbon hydrogen production: part 2—Cyclic experiments and model predictions