Abstract:To enhance the strength of traditional 5xxx series alloys, this work designed Al-Mg-Zn alloys with high Mg content and different Zn/Mg ratios (wt%, Zn/Mg ratio<1.0) drawing inspiration from aging precipitation strengthening of 2xxx or 7xxx series aluminum alloys and thermodynamic calculation. Measurement of density, microhardness and tensile property as well as electron backscatter diffraction (EBSD) and high-resolution transmission electron microscopy (HRTEM) were used to investigate the effects of four different Zn/Mg ratios on the aging precipitation behavior and mechanical property of the studied alloys. As Zn/Mg ratio increases, both N3 (Zn/Mg = 0.37) and N4 (Zn/Mg = 0.71) precipitate fine and dispersed distributed nano T-Mg-32(Al,Zn)(49) precipitates. After a two-step aging treatment process of 90 degree celsius/24 h + 140 degree celsius/8 h, N4 exhibits tensile strength of 595.5 MPa, yield strength of 484 MPa, and elongation of 10.2% in the peak state. N4 features higher specific strength and lower density compared to the popular 7075-T6. The TEM analysis reveals that the addition of trace Sc and Zr leads to the formation of Al-3(Sc,Zr) precipitates, which significantly refines grain size thus enhancing strength. The primary strengthening mechanisms of Al-Mg-Zn-Sc-Zr alloy include grain boundary strengthening, solid solution strengthening, and precipitation strengthening. A yield strength model considering multiple strengthening mechanisms and thermodynamic calculation has been adopted to achieve accurate yield strength predictions. This work provides reference for composition design, microstructure and property regulation of lightweight high-strength aluminum alloys.

Effect of Zn and Mg Content on Microstructure and Properties of Al-Zn-Mg-Cu High Strength Aluminum Alloys

Effect of Zn Concentration on the Microstructure and Mechanical Properties of Al-Mg-Si-Zn Alloys Processed by Gravity Die Casting

Effect of Cu Content and Zn/Mg Ratio on Microstructure and Mechanical Properties of Al–Zn–Mg–Cu Alloys

Effects of Mg content on microstructure and mechanical properties of low Zn-containing Al−xMg−3Zn−1Cu cast alloys

Effect of Zn/Mg Ratio on Aging Precipitates and Mechanical Property of High Mg Content Al-Mg-Zn Alloys with Sc and Zr Additions

Effect of Mg Content on Mechanical Properties and Microstructure of Al-4.8Cu-xMg-1.0Ag Alloys

Effect of Mg Content on Microstructure and Mechanical Properties of Al-Cu-Mg-Ag Alloys

Effect of Zn/Mg ratio on microstructure and mechanical properties of Al-Zn-Mg alloys

Study on the effect of enhanced magnesium and copper contents on microstructure and property of Al-Zn-Mg-Cu alloys with high zinc element content during fabrication processes

Effect of Zn/Mg Ratio on Microstructure and Properties of Cold Extruded Al-xZn-2.4Mg-0.84Cu-0.2Zr-0.25Ti Aluminum Alloy

Effects of Al/Zn Ratio on the Microstructure and Strengthening of Mg-Al-Zn Alloys

Effect of Zn/Mg ratio on T6 state microstructure and properties of Al-xZn-2.6Mg-0.94Cu-0.2Zr-0.8Ti cold extruded aluminum alloy

Effect of Al on the Microstructure and Mechanical Properties of Mg–6Zn–2Sn–0.5Mn Alloy

Effect of Zinc Content on the Ageing Behavior of Al-Zn-Mg-Cu-Li Alloys

Effect of composition on the microstructure and mechanical properties of Mg-Al-Zn alloys

Microstructure and mechanical properties of as aged Mg–3Sn–1Al and Mg–3Sn–2Zn–1Al alloy

Aging Behavior and Precipitate Characterization of Zn-rich Al–Zn–Mg–Cu Alloys with Various Mg and Cu Contents

Effect of Zn Content on the Microstructure and Mechanical Properties of Mg–Al–Sn–Mn Alloys

Effects of Cu and Mg Contents on Mechanical Properties of Al-xCu-yMg-0.6Ag Alloy

Effects of Zn Addition on the Aging Behavior and Mechanical Properties of Mg-8Al-2Sn Wrought Alloy

Mechanical Properties and Microstructures of Mg-Al-Zn Alloys with High Aluminum Contents