Abstract:The mechanical properties of antlers were evaluated through quasi‐static compression tests and microstructural observation of samples from antlers, and the relationship between the sampling position, load direction and microstructure and their mechanical properties were investigated. In the natural environment, antlers have a significant mechanical structure that protects the deer head from injury. In this paper, the mechanical properties of antlers were evaluated through quasi‐static compression tests and microstructural observation of samples from antlers, and the relationship between the sampling position, load direction, and microstructure and their mechanical properties were investigated. Compression experiments confirmed that the tines had the strongest mechanical properties, followed by the main beams and finally the brow tines. The mechanical properties of the test specimens subjected to axial compression were higher than those of lateral compression. The axial load test of the longitudinal sample of the tine of the antler has the best mechanical properties. Its specific energy absorption is 51.33 J/g, the peak crushing force is 1.26 kN, and the mean crushing force is 1.47 kN. There are many tubular structures in the transverse sections of antlers, and the distribution of fibers in the vertical direction is laminar with alternating rows forming a helical structure. Tubular structures were found to be prevalent in some of the better biomechanical structures by comparison. Numerical modeling simulations to describe the effect of tubular structures on the mechanical properties of antlers. The simulation results show that the increase in the size of the tubular structure improves its energy absorption within the variation of a 20% increase in the size of the long and short axis. These findings provide a theoretical and experimental basis for the design of energy‐absorbing structures. Research Highlights In this paper, transverse and longitudinal samples were taken from the main beam, tine, and brow tine of antlers, and axial and lateral compression were carried out, respectively. In this paper, quasi‐static compression experiments were carried out on antler samples to study the effects of sampling position, loading direction, and microstructure on antler mechanical properties. By means of microstructure observation and numerical modeling, it is determined that the size of the antler Havel tube has an effect on its mechanical properties.

Study on material performance of buffalo (Bovinae) horn under quasi-static and dynamic loading

Mechanical properties and failure deformation mechanisms of yak horn under quasi-static compression and dynamic impact

Investigation on dynamic impact behavior of bighorn sheep's horn

Static and Dynamic Mechanical Properties of Cattle Horns

Experimental Study on the Mechanical Properties of the Horn Sheaths from Cattle.

Study on the factors affecting the mechanical properties of antler under quasi‐static compression

The Study of Mechanical Behaviors of Caprinae Horn Sheath under Pendulum Impact

Effects of Structural Gradient Characteristics of Yak Horn on Its Mechanical Properties

High-strain Rate Compressive Behavior of Douglas Fir and Glubam

Structure and Mechanical Characteristic of Cattle Horns

Influence of Gradient Structure of Yak Horn on Its Biological Properties

In Situ Experimental Study on the Synergistic Strengthening and Toughening Mechanisms of Multiple Pore Structures in Deer Antler

Design and mechanical properties analysis of bionic tube based on cattle horn structure

Energy absorption strategy in biological and bioinspired tubular and lamellar structures

Horn and horn core trabecular bone of bighorn sheep rams absorbs impact energy and reduces brain cavity accelerations during high impact ramming of the skull

The Function of Horn Ridges for Impact Damping

Designing impact-resistant bio-inspired low-porosity structures using neural networks

Numerical Study on Buckling Behaviors of Thin-Walled Longitudinal Corrugated Cylindrical Shells under Axial Compression Loads

Oblique Impact Resistance of a Bionic Thin-Walled Tube Based on Antles Osteon

Study on the energy absorption performance of bionic tube inspired by yak horn

Multiscale Characterization and Biomimetic Design of Porcupine Quills for Enhanced Mechanical Performance