Abstract:Some achievements have been made in the study on mechanical properties of antler, but they have not been applied in engineering practice, especially in the study of thin-walled tubes similar to antler crashworthiness. In order to improve the crashworthiness and energy absorption of the thin-walled tube structures, a bionic thin-walled tube with the same inner diameter and equal gradient of outer diameter was designed based on the structural characteristics of antler bone and the principle of structural bionics. The finite element method was used to simulate the energy absorption characteristics of 75 kinds of bionic thin-walled tube structures under the oblique impacts with the impact angles of 10°, 20° and 30°. The polynomial regression element model and multi-objective particle swarm optimization algorithm were used to optimize, and the Pareto front optimization principle was used to obtain the optimal allocation scheme of each target. The minimum distance selection method was used in optimization analysis to obtain the optimal structural design parameters of each scheme. The optimization method used in this study can provide reference for the follow-up research on the crashworthiness of thin-walled tubes, and the optimal structure of bionic thin-walled tubes can provide reference for practical engineering application. The results show that when only considering a single impact angle, the optimal number of biomimetic layers n is 6, and the parameter combination of maximum wall thickness and thickness gradient tmax-a is 2.84 mm-0.38 mm, 2.89 mm-0.29 mm, 2.91 mm-0.34 mm, respectively under 10°, 20° and 30° impact angles. Considering various impact angle weight factors and different configuration schemes, the optimal number of biomimetic layers n is 6, and the parameter combination of maximum wall thickness and thickness gradient tmax-a is 2.95 mm-0.28 mm, 2.92 mm-0.30 mm and 2.85 mm-0.33 mm, respectively.

Design and mechanical properties analysis of bionic tube based on cattle horn structure

Study on the energy absorption performance of bionic tube inspired by yak horn

Crushing characteristics of bionic thin-walled tubes inspired by bamboo and beetle forewing

Study on energy absorption behavior of bionic tube inspired by feather shaft of bean goose

A Bionic Method for the Crashworthiness Design of Thin-Walled Structures Inspired by Bamboo

Bionic design of thin-walled tubes inspired by the vascular structure of bamboo

Oblique Impact Resistance of a Bionic Thin-Walled Tube Based on Antles Osteon

Bio-lightweight and High Strength Structures and Their Bionic Applications in Energy Absorption Structures

Mechanical analysis and bionic improvement on buckling of CFRP tubes with high energy absorption capacity

Crashworthiness design of bionic-shell thin-walled tube under axial impact

Design and Optimization of Equal Gradient Thin-Walled Tube: Bionic Application of Antler Osteon

Experiment and numerical simulation study on the bionic tubes with gradient thickness under oblique loading

Axial compression response of multi-cell tube reinforced by parallel leaf veins inspired secondary ribs

Energy absorption characteristic of bionic lightweight protective structure with curved tubes under impact loading

Impact resistance and energy absorption ability of bio-mimetic thin-walled structures with hollow columns under impact loading

Design and Crashworthiness Analysis of Thin-Walled Tubes Based on a Shrimp Chela Structure

New design and energy absorption characteristic study of bionic beetle's elytra under axial compression

Energy Absorption Performance of Bionic Multi-cell Tubes Inspired by Shrimp chela

Energy-absorbing characteristics of hollow-cylindrical hierarchical honeycomb composite tubes under conditions of dynamic crushing

Bio-inspired multi-cell tubular structures approaching ideal energy absorption performance

A multi-bionic design strategy for modular energy absorption system based on interlocking suture integrated with Bouligand-like arranged perforations