Abstract:A series of LiNi0.5Co0.5−xTixO2 (0⩽x⩽0.5) are prepared by a tartaric acid-assisted sol–gel technique. The phase formation process is observed by TG–DTA. It is found that the target product appears at a temperature higher than 400°C and completes to phase formation at 700°C. The crystal structure and morphology are characterized by XRD, SEM and Raman spectroscopy. XRD patterns show that the as-prepared sample transforms from hexagonal structure into cubic structure with the increase of Ti content in LiNi0.5Co0.5−xTixO2. Raman spectra also demonstrate the successive substitution of Ti for Co in the structure with band blue-shift phenomenon. SEM images confirm that the as-prepared sample exhibits narrow and regular particles with the size between 0.5 and 1.5μm. The apparent particle size of sample starts to decrease with x⩽0.1, and the gradually increases by introducing Ti dopant with higher content (x⩾0.15). The electrochemical behavior of the sample displays different characteristics after Ti substitution. It is found that the initial working potential increases with the increase of Ti doping content. As a result, the initial lithium storage capacity for trace Ti-doped sample is higher than that delivered by the pristine one. The decrease of reversible capacity for high degree Ti-doped sample is ascribed to the electrochemical inactivity of the cubic compound in the sample. Therefore, trace Ti doping is beneficial to achieve promising cathode material for lithium-ion batteries.

Titanium-Substituted Tavorite LiFeSO4 F As Cathode Material for Lithium Ion Batteries: First-Principles Calculations and Experimental Study.

Electronic Structure of LiTi0.25Fe0.75SO4F Positive-Electrode Material for Lithium-Ion Battery

Improved Electrochemical Properties in the Li3Fe2(PO4)3 by Titanium and Vanadium Doping

Investigation on performance of Li(Ni 0.5 Co 0.2 Mn 0.3 ) 1−x Ti x O 2 cathode materials for lithium-ion battery

Improved Structure Stability and Performance of LiFeSO4F Cathode Material for Lithium–Ion Batteries by Magnesium Substitution

Titanium-doped Li2FeSiO4/C Composite As the Cathode Material for Lithium-Ion Batteries with Excellent Rate Capability and Long Cycle Life

Titanium doped LiVPO4F cathode for lithium ion batteries

Structural, Electrochemical and Thermal Properties of LiNi0.8−yTiyCo0.2O2 As Cathode Materials for Lithium Ion Battery

Effects of Titanium Incorporation on Phase and Electrochemical Performance in LiFePO4 Cathode Material

Synthesis and Electrochemical Properties of Ti4+ Doped Li3−xFe2−xTix(PO4)3/C Cathode Materials

Tartaric Acid-Assisted Sol–gel Synthesis of LiNi0.5Co0.5−Ti O2 (0 ⩽x⩽ 0.5) As Cathode Materials for Lithium-Ion Batteries

Li<sub>0.99</sub>Ti<sub>0.01</sub>FePO<sub>4</sub>/C composite as cathode material for lithium ion battery

Understanding the Combined Effects of Microcrystal Growth and Band Gap Reduction for Fe(1−)Ti F3 Nanocomposites As Cathode Materials for Lithium-Ion Batteries

Preparation and characterization of Ti4+-doped LiFePO4 cathode materials for lithium-ion batteries

Preparation and effects of F-doping on electrochemical properties of Li4Ti5O12 as anode material for Li-ion battery

Synthesis and electrochemical performance of Li<sub>1+x</sub>Ti<sub>2-x</sub>Fe<sub>x</sub>(PO<sub>4</sub>)<sub>3</su b>/C anode for aqueous lithium ion battery

Synthesis, Characterization and Electrochemical Performance of Li2fesio4/C Cathode Materials Doped by Vanadium at Fe/Si Sites for Lithium Ion Batteries

Influence of Ti4+ Doping on Electrochemical Properties of Lifepo4/C Cathode Material for Lithium-Ion Batteries

Synthesis and Electrochemical Performance of F-doped Li4Ti5O12 for Lithium-Ion Batteries

Study on Vanadium Substitution to Iron in Li 2 FeP 2 O 7 as Cathode Material for Lithium-ion Batteries

Titanium Oxyfluoride as a Material for Negative Electrodes of Lithium-Ion Batteries