Abstract:A series of LiNi0.5Co0.5−xTixO2 (0⩽x⩽0.5) are prepared by a tartaric acid-assisted sol–gel technique. The phase formation process is observed by TG–DTA. It is found that the target product appears at a temperature higher than 400°C and completes to phase formation at 700°C. The crystal structure and morphology are characterized by XRD, SEM and Raman spectroscopy. XRD patterns show that the as-prepared sample transforms from hexagonal structure into cubic structure with the increase of Ti content in LiNi0.5Co0.5−xTixO2. Raman spectra also demonstrate the successive substitution of Ti for Co in the structure with band blue-shift phenomenon. SEM images confirm that the as-prepared sample exhibits narrow and regular particles with the size between 0.5 and 1.5μm. The apparent particle size of sample starts to decrease with x⩽0.1, and the gradually increases by introducing Ti dopant with higher content (x⩾0.15). The electrochemical behavior of the sample displays different characteristics after Ti substitution. It is found that the initial working potential increases with the increase of Ti doping content. As a result, the initial lithium storage capacity for trace Ti-doped sample is higher than that delivered by the pristine one. The decrease of reversible capacity for high degree Ti-doped sample is ascribed to the electrochemical inactivity of the cubic compound in the sample. Therefore, trace Ti doping is beneficial to achieve promising cathode material for lithium-ion batteries.

Effects of Titanium Incorporation on Phase and Electrochemical Performance in LiFePO4 Cathode Material

Enhanced Electrochemical Performance of LiNi0.8Co0.15Al0.05O2 Cathode Material via Li2TiO3 Nanoparticles Coating

Improved Electrochemical Properties in the Li3Fe2(PO4)3 by Titanium and Vanadium Doping

Influence of Ti4+ Doping on Electrochemical Properties of Lifepo4/C Cathode Material for Lithium-Ion Batteries

Investigation on performance of Li(Ni 0.5 Co 0.2 Mn 0.3 ) 1−x Ti x O 2 cathode materials for lithium-ion battery

Preparation and characterization of Ti4+-doped LiFePO4 cathode materials for lithium-ion batteries

The Effects of Titanium on the Phase Structure and Charge/Discharge Performance of Ml(Nicomnti)(5) Alloy

Titanium-Substituted Tavorite LiFeSO4 F As Cathode Material for Lithium Ion Batteries: First-Principles Calculations and Experimental Study.

Influence of Ti doping on microstructure and electrochemical performance of LiNi0.5Mn1.5O4 cathode material for lithium-ion batteries

Influence of Lanthanum Doping on Performance of LiFePO4 Cathode Materials for Lithium-Ion Batteries

Effect of Ti doping on LiFePO4/C cathode material with enhanced low-temperature electrochemical performance

Electrochemical Performance of Ti4+-doped LiFePO4 Synthesized by Co-Precipitation and Post-Sintering Method

Excess capacity on compound phases of Li2FeTiO4 composite cathode materials synthesized by hydrothermal reaction using optional titanium sources to boost battery performance

Synthesis and Electrochemical Properties of Ti4+ Doped Li3−xFe2−xTix(PO4)3/C Cathode Materials

Stable cycle-life properties of Ti-doped LiFePO4 compounds synthesized by co-precipitation and normal temperature reduction method

Effect of Ti content on preparation of LiFePO4 cathode from FeSO4·7H2O waste residue

Li<sub>0.99</sub>Ti<sub>0.01</sub>FePO<sub>4</sub>/C composite as cathode material for lithium ion battery

Tartaric Acid-Assisted Sol–gel Synthesis of LiNi0.5Co0.5−Ti O2 (0 ⩽x⩽ 0.5) As Cathode Materials for Lithium-Ion Batteries

Effects of Tio2 Phase on the Performance of Li4ti5o12 Anode for Lithium-Ion Batteries

Titanium doped LiVPO4F cathode for lithium ion batteries

Titanium-doped Li2FeSiO4/C Composite As the Cathode Material for Lithium-Ion Batteries with Excellent Rate Capability and Long Cycle Life