Abstract:In ITER, pellets are calculated to require more than 8 times the mass than currently planned to reliably trigger ELMs. Unmitigated heat flux impulses from edge-localized modes (ELMs) are intolerable in ITER at full power and current. Therefore, ITER operation relies on multiple approaches to control ELM heat fluxes. One method is pellet ELM pacing to instigate small rapid ELMs with low heat flux. Predicting the performance of pellet pacing is critical for ITER, which is expected to operate in a regime with a low-collisionality, peeling-limited pedestal. However, to trigger ELMs the local pressure increase in the expanding pellet cloud pushes the equilibrium over the ballooning stability limit. In this work, linear and nonlinear M3D-C1 simulations are used to predict pellet mass thresholds in DIII-D discharges and ITER scenarios with peeling-limited pedestals. It is found that the distance of the equilibrium's operational point from the ballooning branch of the pedestal stability boundary strongly changes thresholds. Linear M3D-C1 simulations find a strong dependence of the pellet mass threshold on the poloidal injection location for ITER's 15 MA, Q=10 scenario. The required pellet mass at the planned injection locations is 8 to 17 times larger than currently considered. However, such linear simulations do not include pellet ablation physics or time evolution of density and temperature. A new scheme of 2D nonlinear simulations, coupled with linear stability analysis at various steps throughout the nonlinear time evolution, was developed to include such physics and improve on the linear results. These new nonlinear-to-linear simulations confirm previous findings. This result suggests that pellet ELM triggering in ITER could require pellets much larger than those currently planned, which makes ELM-pacing operationally challenging. On the other hand, fueling pellets injected from the high-field side will likely not unintentionally trigger ELMs in an otherwise ELM-stable plasma.

Analytical Formula for Pellet Fuel Source Density in Toroidal Plasma Configurations Based on an Areal Deposition Model

Simulation study of deuterium pellet ablation and deposition in the EAST tokamak with HPI2 code

Drift of ablated material after pellet injection in a tokamak

Estimation of CFETR performance and burning fraction in diﬀerent pellet fueling scenarios by a multi-species radial transport model

Hollow pellet injection for magnetic fusion

Lagrangian particle model for 3D simulation of pellets and SPI fragments in tokamaks

Estimation of China Fusion Engineering Test Reactor performance and burning fraction in different pellet fueling scenarios by a multi-species radial transport model

Near-field simulations of pellet ablation for disruptions mitigation in tokamaks

Particle control via cryopumping and its impact on the edge plasma profiles of Alcator C-Mod

Optimization of pellet design parameters to achieve deep fueling depth in EAST plasma with PAM code

Multiple-isotope pellet cycles captured by turbulent transport modelling in the JET tokamak

Modeling of carbon pellets disruption mitigation in an NSTX-U plasma

Fuel Pellet Alignment in Heavy-Ion Inertial Fusion Reactor

Pellet fuelling of plasmas with ELM mitigation by resonant magnetic perturbations in MAST

Parallel expansion of a fuel pellet plasmoid

Prediction of pellet mass thresholds for ELM triggering in low-collisionality, ITER-like discharges

Development of a precise size-controllable pellet injector for the detailed studies of ablation phenamena and mechanism

Burning Fraction, Radial Transport, and Steady State Profiles of Multi-Species Particles in CFETR Burning Plasmas

Fuelling of deuterium-tritium plasma by peripheral pellets in JET experiments

Issues in Formation of Cryogenic Pellets for Fusion Applications

Density pedestal prediction model for tokamak plasmas