Abstract:For spot scanning dark-field scattering technology, the defocus caused by the change in wafer surface height decreases the defect detection rate and size measurement repeatability. The demand for accurately and rapidly measuring the wafer surface height online is becoming increasingly urgent. The defect detection system integrates scattering, reflection, film, and topography defect detection channels. The integration of laser-triangulation-based defocus measurement into the bright-field optical path is proposed. The laser beam is directed onto the surface of the wafer, and the reflected light is transmitted through a lens onto the photosensitive surface of a four-quadrant detector. This detector captures both the strength and position of the reflected signal simultaneously. In this paper, a triangulation-modified model is established to obtain the height of each inspection spot on the wafer surface through the position signal of the reflected image. When the signal-to-noise ratio of the simulated reflection image position is 20 dB, the signal-to-noise ratio of the height measurement resolved by the triangulation-modified model is 41 dB, and the measurement error is less than 0.2 μm, indicating that the model has a noise suppression effect. The spot-scanning imaging system is established, and the height measurement results of the triangulation measurement model are verified using a laser interferometer. Within the travel range of 69 μm, the system has a measurement accuracy better than ±1 μm and a measurement repeatability better than ±0.2 μm, which meet the measurement requirements of the spot scanning imaging system. The system is utilized for defect detection and defocus measurement of the wafer surface, along with the motion mechanism, to accurately and rapidly obtain the height distribution of the wafer surface.

High-efficiency ultra-precision comparator for d-spacing mapping measurement of silicon

A Novel Method to Simultaneously Measure the Straightness

An Axial Displacement Measurement Relying on the Double-Helix Light Beam

A Novel Method To Enhance The Sensitivity For Two-Degrees-Of-Freedom Straightness Measurement

Emission Difference Super-Resolution Microscopy with Optical Lattices Scanning and Wide Field Detection

Optimization of the Cavity Beam-Position Monitor System for the Shanghai Soft X-ray Free-Electron Laser User Facility

A New Optical Angle Measurement and Compensation

A method of bunch by bunch measurement at nanoseconds interval by using cavity beam position monitors

Automatic Measurement of Silicon Lattice Spacings in High-Resolution Transmission Electron Microscopy Images Through 2D Discrete Fourier Transform and Inverse Discrete Fourier Transform

Dual imaging-unit atomic force microscope for nanometer order length metrology based on reference scales

A Fully Solid-State Beam Scanner for FMCW LiDAR Application

Nondestructive Measurement and High-Precision Evaluation of the Electrical Conductivity of Doped GaAs Wafers Using Microwaves.

A compact CCD-monitored atomic force microscope with optical vision and improved performances.

High-speed and high-precision measurement of biaxial in-plane displacements: tens of nanometers principle error suppression in microprobe sensors

High Throughput Oxide Lattice Engineering by Parallel Laser Molecular Beam Epitaxy and Concurrent X-ray Diffraction

A Novel Wafer Defocus Measurement Method for Spot-Scanning Imaging System Using Laser Triangulation

A white-light interferometry method for 3D measurement of compactly spaced micro-nano structural units

A Laser Diffraction Measuring System for Submicron Pixel Size Image Sensor

Absolute Angular Position Measurement by Dual-Comb Spectroscopy of an Autocollimation Diffracted Beam

Silicon PIN Photodiode Applied to Acquire High-Frequency Sampling XAFS Spectra

Solid-State Slow-Light Beam Scanner With Ultra-Large Field of View and High Resolution