Abstract:The piston/cylinder interface of swash plate–type axial piston machines represents one of the most critical design elements for this type of pump and motor. Oscillating pressures and inertia forces acting on the piston lead to its micro-motion, which generates an oscillating fluid film with a dynamically changing pressure distribution. Operating under oscillating high load conditions, the fluid film between the piston and cylinder has simultaneously to bear the external load and to seal the high pressure regions of the machine. The fluid film interface physical behavior is characterized by an elasto-hydrodynamic lubrication regime. Additionally, the piston reciprocating motion causes fluid film viscous shear, which contributes to a significant heat generation. Therefore, to fully comprehend the piston/cylinder interface fluid film behavior, the influences of heat transfer to the solid boundaries and the consequent solid boundaries’ thermal elastic deformation cannot be neglected. In fact, the mechanical bodies’ complex temperature distribution represents the boundary for nonisothermal fluid film flow calculations. Furthermore, the solids-induced thermal elastic deformation directly affects the fluid film thickness. To analyze the piston/cylinder interface behavior, considering the fluid-structure interaction and thermal problems, the authors developed a fully coupled simulation model. The algorithm couples different numerical domains and techniques to consider all the described physical phenomena. In this paper, the authors present in detail the computational approach implemented to study the heat transfer and thermal elastic deformation phenomena. Simulation results for the piston/cylinder interface of an existing hydrostatic unit are discussed, considering different operating conditions and focusing on the influence of the thermal aspect. Model validation is provided, comparing fluid film boundary temperature distribution predictions with measurements taken on a special test bench.

Effect of Temperature on the Cylinder Block/Valve Plate Interface Performance

Effects of Oil Channels and Oil Flow Rate on Cooling Performance of Closed Circuit Axial Piston Transmission

Modelling and Experiment Study on Fluid Character of Axial Piston Pump

A Study on Heat Transfer Model for the Dynamic Contact Boundary Between Piston Ring and Cylinder Liner

Development And Simulation Of Lubrication Test System For Port Plate/Cylinder Block In Axial Piston Pump

Numerical Analysis of Lubrication Property for Port Plate Pair of Axial Piston Pump

THE TRANSITION OF WEAR AND LEAKAGE CHARACTERISTICS OF THE CYLINDER BLOCK/VALVE PLATE INTERFACE IN A WIDE RANGE OF OPERATING CONDITIONS

Multi-objective Optimization Design of Sliding Bearing of High-speed Centrifugal Pump Based on Lubrication Characteristics Analysis

FEM Based Simulation Study on Static and Dynamic Properties of Port Plate in Axial Piston Pump

Heat Transfer and Thermal Elastic Deformation Analysis on the Piston/Cylinder Interface of Axial Piston Machines

Modeling and Analysis of the Tilt Behavior of the Cylinder Block in a High-Speed Axial Piston Pump

Tolerance Design Guideline for Piston/cylinder Interface of Electro-Hydrostatic Actuator (EHA) Pumps Based on a Thermal-Fluid-Structure Model

Performance Optimization for High Speed Axial Piston Pump Considering Cylinder Block Tilt

Thermal-fluid-structure coupling analysis for valve plate friction pair of axial piston pump in electrohydrostatic actuator (EHA) of aircraft

Experimental and Numerical Studies on Erosion Damage in Damping Holes on the Valve Plate of an Axial Piston Pump

Effects of the dimensional and geometrical errors on the cylinder block tilt of a high-speed EHA pump

Comparative Study on Asymmetric and Symmetric Configurations of Valve Plates in Axial Piston Pumps

Numerical study on tribological performance of the floating valve-plate pair in axial piston pump

Analysis of the Cylinder Block Tilting Inertia Moment and Its Effect on the Performance of High-Speed Electro-Hydrostatic Actuator Pumps of Aircraft

Effect of Surface Texture on Wear Reduction of the Tilting Cylinder and the Valve Plate for a High-Speed Electro-Hydrostatic Actuator Pump

Experimental Study on the Influence of the Rotating Cylinder Block and Pistons on Churning Losses in Axial Piston Pumps