Abstract:Under the pressure of carbon neutrality, many carbon capture, utilization and storage (CCUS) technologies have witnessed rapid development in recent years, including oxy-fuel combustion (OFC) technology. However, the conventional OFC technology usually depends on the flue gas recirculation system which faces significant investment, high energy consumption, and potential low-temperature corrosion problem. Considering these deficiencies, the direct utilization of pure oxygen to achieve particle fluidization and fuel combustion may reduce the overall energy consumption and CO2 capture costs. In this paper, the fundamental structure of a self-designed 130 t·h–1 pure oxygen combustion circulating fluidized bed (CFB) boiler was provided, and the computational particle fluid dynamics (CPFD) method was employed to analyze the gas-solid flow characteristics of this new-concept boiler under different working conditions. The results indicate that through the careful selection of design or operational parameters, such as average bed material size and fluidization velocity, the pure oxygen combustion CFB system can maintain the ideal fluidization state, namely, significant internal and external particle circulation. Besides, the contraction section of the boiler leads to the particle backflow in the lower furnace, resulting in the particle suspension concentration near the wall region being higher than that in the center region. Conversely, the upper furnace still retains the classic core-annulus flow structure. In addition to increasing solid circulation rate by reducing the average bed material size, altering primary gas ratio and bed inventory can also exert varying degrees of influence on the gas-solid flow characteristics of the pure oxygen combustion CFB boiler.

Study on Scale-Up Characteristics of Oxy-Fuel Combustion in Circulating Fluidized Bed Boiler by 3D CFD Simulation

Study on Scale-Up Characteristics in Supercritical CO2 Circulating Fluidized Bed Boiler by 3D CFD Simulation

Study on Oxy-Fuel Combustion Behaviors in a S-CO2 CFB by 3D CFD Simulation

Three-dimensional Simulation of Oxy-Fuel Combustion in a Circulating Fluidized Bed

Numerical investigation on oxy-combustion characteristics of a 200MW e tangentially fired boiler

Numerical Simulation on Hydrodynamics and Combustion in a Circulating Fluidized Bed under O<Subscript>2</Subscript>/CO<Subscript>2</Subscript> and Air Atmospheres

Numerical Simulation of Oxy‐fuel Combustion Characteristics in a 200 MWe Coal‐fired Boiler

Simulation of Gas-Solid Flow Characteristics of the Circulating Fluidized Bed Boiler under Pure Oxygen Combustion Conditions

Three-Dimensional Eulerian–Eulerian Simulation of Coal Combustion under Air Atmosphere in a Circulating Fluidized Bed Combustor

Numerical Study on Combustion and Heat Transfer Properties under Oxy-fuel Condition in a 600MW Utility Boiler

Oxy-fuel Combustion Behaviors in a Fluidized Bed: A Combined Experimental and Numerical Study

3D Simulation on Pressurized Oxy-Fuel Combustion of Coal in Fluidized Bed

Three-dimensional Full-Loop Numerical Simulation of Co-Combustion of Coal and Refuse Derived Fuel in a Pilot-Scale Circulating Fluidized Bed Boiler

Three-dimensional simulation of the co-firing of coal and biomass in an oxy-fuel fluidized bed

Simulation of Gas-Solid Combustion Characteristics in a 1000 MW CFB Boiler for Supercritical CO2 Cycle

Simulation on Coal-Fired Supercritical CO2 Circulating Fluidized Bed Boiler: Coupled Combustion with Heat Transfer

12th International Conference on Fluidized Bed Technology THREE-DIMENSIONAL COAL COMBUSTION SIMULATION OF CIRCULATING FLUIDIZED BED BY EULERIAN-EULERIAN METHODS

Eulerian-Lagrangian Full-Loop Simulation of an Industrial-Scale Circulating Fluidized Bed Boiler

Simulation of Combustion of Municipal Solid Waste and Coal in an Industrial-Scale Circulating Fluidized Bed Boiler

CFD Modeling of Oxy-Coal Combustion in Circulating Fluidized Bed

Numerical simulation of circulating fluidized bed oxy-fuel combustion with Dense Discrete Phase Model