Abstract:In order to achieve tunable polarization rotation of the transmitted wave and controllable bandpass response simultaneously, a new graphene frequency selective surface (GFSS) is proposed for terahertz applications. The GFSS is built up by sandwiching a high-resistivity Si-substrate with a graphene patch array and a graphene sheet, both of which are electromagnetically biased. The configuration is analyzed by using an equivalent tensorial surface conductivity and transmission matrices of graphene structures, which is validated by full-wave simulations. The transmission coefficient, axial ratio, and polarization rotation angle of the bandpass GFSS are captured. An observable polarization rotation angle is obtained with a relatively large transmittance, which is superior to the graphene sheet and bandstop patch-type structures. The passband frequency is found to be not sensitive to the incident angle for either TE-or TM-polarized incidence, while it can be shifted from 1.6 to 2.2 THz with the polarization rotation angle varying from 24 degrees to 16 degrees by changing the chemical potential from 0.6 to 1 eV. When the applied magnetic field is set up to 3 T, the maximum rotation angle of polarization reaches up to 30 degrees for TM incidence and 45 degrees for TE incidence while the passband remains around 2 THz.

Tunable Bandpass Graphene Frequency Selective Surface with Quasi-Elliptic Response

Tunable complimentary frequency selective surface (CFSS) based on graphene for THz application

A Bandpass Graphene Frequency Selective Surface with Tunable Polarization Rotation for THz Applications

Magnetically Tunable Graphene Patch Frequency Selective Surface (Fss)

Terahertz Frequency Selective Surface Based on Metal-Graphene Structure with Independent Frequency Tuneability

Graphene-FSS Hybrid Absorptive Structure with Amplitude/Frequency Dual-Modulated Passband

Improved Hybrid Fdtd Method for Studying Tunable Graphene Frequency-Selective Surfaces (gfss) for Thz-Wave Applications

A Novel Three Dimensional Tunable Frequency Selective Surface Based on Graphene Micro-Ribbons

Graphene Based Active Frequency Selective Surface with Independent Frequency and Amplitude Tunabilities

Efficient Simulation of Tunable Graphene-Based Frequency Selective Surfaces (GFSS) with an Improved HIE-FDTD Method

Tunable THz Multiband Frequency-Selective Surface Based on Hybrid Metal–Graphene Structures

Tunable Graphene Fss for Terahertz Applications

Parallel Computing Graphene Frequency Selective Surface (GFSS) with Large Finite Array Using HIE-FDTD Method on High Performance Computer

A Novel Frequency Selective Surface with Smaller Size and Wide Band

Bandpass Frequency Selective Surface with Two Sharp Sidebands Based on Shunted Quarter‐mode Substrate Integrated Waveguide Cavities

High Roll-Off Frequency Selective Surface With Quasi-Elliptic Bandpass Response

Dual-band Frequency Selective Surface with Quasi-Elliptic Bandpass Response

A Bandpass Frequency Selective Surface With a Low Cross-Polarization Based on Cavities With a Hybrid Boundary

A Novel Fss Based on Hybrid Boundary Condition Cavity

Filtenna-Filtenna Design for Broadband and High-Selectivity Frequency Selective Surface

Graphene-loaded THz Frequency Selective Surface with Tunable Transmission Band