Effects of Refueling Position and Residence Time on Pre-Combustion Cracking Characteristic of Aviation Kerosene RP-3

Feilong Song,Yun Wu,Shida Xu,Xingkui Yang,Xin Chen

DOI: https://doi.org/10.1016/j.fuel.2020.117548

IF: 7.4

2020-01-01

Fuel

Abstract:Kerosene-air detonation is the key to the application of rotating detonation engine in aviation. The kerosene-air mixture has low activity and requires a lot of energy for direct initiation. In this study, a novel fuel treatment device, pre-combustion cracking reactor, is proposed to produce prone detonation gaseous fuel with smaller detonation cell size and critical initiation energy by cracking aviation kerosene RP-3 on-line. The effects of the refueling position and residence time on cracking products distribution were investigated at refueling distance of 100-260 mm and sampling distance of 100-260 mm with interval 40 mm under the fuel ratio of 3.9, 4.4, 5.2, 5.9 and 6.9. It is observed that aviation kerosene RP-3 was converted into hydrogen, acetylene and other products detected by gas chromatograph. The cracking products account for 21% of the total cracking gas volume. In the experiments, the maximum yields and selectivities of hydrogen and acetylene were 18.9 mg/s and 95 mg/s, 25.7% and 18.9%, respectively, at refueling distance of 100 mm and fuel ratio of 6.9, and the maximum energy conversion efficiency was 74% at refueling distance of 100 mm and fuel ratio of 3.9. The average C/H ratio of cracking products is 6.21, which is close to that of mono-olefin. Moreover, the effect of fuel ratio and refueling distance on C/H ratio is not significant.