Abstract:The compressive mechanical properties of concrete-based materials are strongly affected by the presence of additions in the mix and load application velocity. Fiber-Reinforced Rubberized Concrete (FRRC) was recently proposed in the literature as a concrete-based material with the aim of obtaining a ductile material with reduced environmental burden and characterized by excellent energy absorption performances during impact loading. FRRC joins and balances the advantages and drawbacks of Fiber Reinforce Concrete (FRC) and Rubberized Concrete (RuC). However, its behavior has rarely been investigated under dynamic loadings, although gaining sufficient knowledge on their high strain rate behavior is crucial for their full-scale application. This study aims to investigate the high-strain rate compressive behavior of FRRC with fine rubber aggregates and micro-straight steel fibers. Tests were performed using conventional quasi-static loading with a compressive testing machine and high-strain rate tests with a 080-mm Split Hopkinson Pressure Bar (SHPB) for strain rates up to 200 s(-1). The experimental program comprises the characterization of Plain Concrete (PC), FRC, RuC, and FRRC with a full test matrix (a total of 192 specimens) covering fiber contents up to 1.5% and rubber volume substitution ratios up to 30%. The micro-scale characterization of the material using SEM scans provided a complete understanding of the observed macro-scale behavior. A high-speed camera was used to capture the cracking development processes. The measurements both for quasi-static and dynamic tests indicate that the addition of fibers improves the ductility or toughness with a slight increase in the compressive strength and the substitution with rubber aggregates significantly reduces the compressive strength with improved ductility or toughness. The combination of fiber and rubber (FRRC) leads to a combination of the previously described single marginal effects. The dynamic tests reveal the marked strain rate dependency, although specimens with large rubber volume substitution were more sensitive to the strain rate effect within the considered test range. Based on the test data, data-driven models for strength reduction factor (SRF) and dynamic increase factor (DIF) are proposed for different types of FRRC. The image-based waveform discussion provides evidence of the "double-peak" phenomenon highlighting the different features of the observed signals and damage evolution. Ultimately, this study indicates that FRRC has an excellent high-strain rate compressive behavior and can be a promising material to be employed to protect structures against impact and blast loads.

Hyperelastic Mechanical Properties of Chopped Aramid Fiber-Reinforced Rubber Composite under Finite Strain

Assessment of hyperelastic constitutive models for chopped aramid fibre-reinforced rubber composites

High-strain rate compressive behavior of Fiber-Reinforced Rubberized Concrete

Factor Analysis of Machining Parameters of Fiber-Reinforced Polymer Composites Based on Finite Element Simulation with Experimental Investigation

Mechanical Properties and Energy Absorption Capacity of Chopped Fiber Reinforced Natural Rubber

Fatigue Failure Behavior of Aramid Fiber Reinforced Styrene Butadiene Rubber Composite with Different Fiber Coatings

Improvement of interfacial strength and fatigue stability of aramid fiber/rubber composites by constructing multiscale interphase structures

A NEW RUBBER-CORD COMPOSITE MODEL AND THE CORRESPONDING PARAMETER IDENTIFICATION SCHEME

An Anisotropic Hyper-Visco-pseudo-elastic Model and Explicit Stress Solutions for Fabric Reinforced Rubber Composites

A micromechanics-based artificial neural networks model for rapid prediction of mechanical response in short fiber reinforced rubber composites

An approach to predict the mechanical properties of CFRP based on cross-scale simulation

Anisotropic Hyper-Viscoelastic Behaviors of Fabric Reinforced Rubber Composites

Aramid Nanofiber/XNBR Nanocomposite with High Mechanical, Thermal, and Electrical Performance

Experiment and mesoscopic modelling on the dynamic compressive behaviors of a new carbon fiber-reinforced cement-based composite

A Methodology to Predict the Fatigue Life under Multi-Axial Loading of Carbon Fiber-Reinforced Polymer Composites Considering Anisotropic Mechanical Behavior

Enhanced Estimation of Axial Compressive Strength for CFRP Based on Microscale Numerical Simulation and the Response Surface Method

Mechanical design of rubber-based sealing composites reinforced with short non-asbestos fibers

Development of a Numerical Material Model for Axial Crushing Mechanical Characterization of Woven CFRP Composites

Modeling the elastoplastic behavior of agave fiber prior and after its incorporation within a thermoplastic matrix: Analysis of the fiber aspect ratio on the mechanical properties

A Unified Micromechanical Model for the Mechanical Properties of Two Constituent Composite Materials. Part IV: Rubber-Elastic Behavior

Research on the Mechanical and Thermal Properties of Carbon-Fiber-Reinforced Rubber Based on a Finite Element Simulation