Abstract:All inorganic cesium lead halide (CsPbX3, X=Cl, Br, I) perovskites, as a best candidate in perovskite family, have attracted great interest due to their fascinating optical, chemical and semiconducting properties and have demonstrated as potential building blocks in various applications such as photodetectors, light-emitting diodes, solar cells and lasers. Numerous efforts have been made to develop various CsPbBr3 perovskites with tunable morphology such as quantum dots (0-D), nanowires (1-D) and nanoplates (2-D) to achieve desired properties. Among them, anisotropic colloidal quasi-twodimensional nanoplates have been attracting a great deal of research enthusiasm. In this work, all-inorganic CsPbBr3 perovskite nanoplates were prepared by precisely controlling the synthesis temperature and time in the hot-injection method. The reaction was performed under the protective atmosphere of nitrogen, at 110 degrees C for 5 s and the reaction mixture was cooled by ice-water bath. Afterwards, the solution was purified by centrifugation at 12000 r min(-1) and the precipitates were dissolved in n-octane. The structure, morphology and optical properties of as-synthesized CsPbBr3 perovskite nanoplates were characterized and analyzed by the series of characterization techniques. The results show that a sharp PL emission was detected at the peak of 500 nm with a narrow full width at the half maximum (FWHM) of 26 nm. The high-resolution transmission electron microscopy (HR-TEM) showed that the as-prepared CsPbBr3 nanoplates were uniform in size, with an average length of 20-21 nm and a thickness of 3-5 nm. All the above studies evidenced that, the improved high temperature-injection method have yielded the CsPbBr3 perovskite nanoplates with uniform size distribution, high color purity and improved optical properties. In addition, light emitting diode (LED) with CsPbBr3 perovskite nanoplates as the perovskite luminescent layer were fabricated by the simple solution spin-coating and vacuum evaporation technique. The device structure of the LED is ITO/PEDOT:PSS/TFB/CsPbBr3 NPs/TPBI/LiF/Al. In the device configuration, the patterned ITO is used as the anode, the spin-coated TFB with larger hole mobility is used as the hole transport layer, vacuum evaporated TPBI is chosen as the electron transport layer, as-prepared CsPbBr3 perovskite nanoplates are used as the light emitting active layer, and the vacuum evaporated LiF as the electron injection layer with Al cathode. The external quantum efficiency (EQE) of 1.71% and the luminous brightness of 297 cd m(-2) was achieved for the LED devices fabricated by the solution method. Moreover, the densification and roughness of CsPbBr3 perovskite nanoplates as the luminescent layers were measured by atomic force microscopy (AFM). The improved efficiency and performance of our device was directly related to the compact and smooth surface of CsPbBr3 luminescent active layer. This result lays a foundation for the fabrication of high efficiency light emitting diode devices by utilizing all-inorganic CsPbBr3, and provides a relatively simple method for the synthesis of CsPbBr3 nanoplates, as well as good repeatability of thin film device fabrication process.

A CTAB-mediated Antisolvent Vapor Route to Shale-Like Cs4PbBr6 Microplates Showing an Eminent Photoluminescence

One-Step Preparation of High-Stability CsPbX3/CsPb2X5 Composite Microplates with Tunable Emission

Epitaxial Growth of Highly Stable Perovskite CsPbBr3/nZnS/Al Core/multi-Shell Quantum Dots with Aluminium Self-Passivation

Efficient Solid-State Electrochemiluminescence from High-Quality Perovskite Quantum Dot Films.

Confined Synthesis of Stable and Uniform CsPbBr<sub>3</sub> Nanocrystals with High Quantum Yield up to 90% by High Temperature Solid-State Reaction

In Situ Low-Temperature Growth and Superior Luminescent Property of Well-Aligned, High-Quality Cubic CsPbBr3 Micrometer-Scale Single Crystal Arrays on Transparent Conductive Substrates.

Highly Bright and Stable CsPbX3@Cs4PbX6 Hexagonal Nanoarchitectonics Created by Controlling Dissolution‐Recrystallization of CsPbX3 Nanomaterials

Single CsPbBr3 Perovskite Microcrystals: From Microcubes to Microrods with Improved Crystallinity and Green Emission

The Renascence of One Ancient Recipe for Synthesizing Luminescent Cs4PbBr6 Microcrystals

Simultaneous enhancement of luminescence and stability of lead halide perovskites by a diatomite microcavity for light-emitting diodes

Preparation And Photoelectric Properties Of Cspbbr3 Perovskite Nanoplates

Ligand Regulated Selective Synthesis of Cs4PbCl6 Microcrystals in Microemulsion and Their Cathodoluminescence

Chemical vapor deposition growth of single-crystalline cesium lead halide microplatelets and heterostructures for optoelectronic applications

Photoluminescence and Lasing of Cs4PbBr6 Micro‐Flakes and Micro‐Flowers with Embedded CsPbBr3 Nanocrystals

Large-Scale Synthesis of Highly Luminescent Perovskite Nanocrystals by Template-Assisted Solid-State Reaction at 800 °C

Solution-Processed Approach to Highly Luminescent Trigonal Cs4pbbr6 Nanodisks and Their Underlying Shape Evolution

Confined Synthesis of Stable and Uniform CsPbBr 3 Nanocrystals with High Quantum Yield up to 90% by High Temperature Solid‐State Reaction

Synthesis and Improved Photoluminescent Properties and Stability of Bromine‐Rich CsPbBr3 Nanocrystals Via using CTAB as Additive

Solvothermal synthesis of perovskite CsPbCl3 nanoplates and improved photoluminescence performance through postsynthetic treatment

Controllable Modulation of Morphology and Property of CsPbCl3 Perovskite Microcrystals by Vapor Deposition Method

Stable, Low-Threshold Amplification Spontaneous Emission of Blue-Emitting CsPbCl2Br1 Perovskite Nanocrystals Glasses with Controlled Crystallization