Abstract:All inorganic cesium lead halide (CsPbX3, X=Cl, Br, I) perovskites, as a best candidate in perovskite family, have attracted great interest due to their fascinating optical, chemical and semiconducting properties and have demonstrated as potential building blocks in various applications such as photodetectors, light-emitting diodes, solar cells and lasers. Numerous efforts have been made to develop various CsPbBr3 perovskites with tunable morphology such as quantum dots (0-D), nanowires (1-D) and nanoplates (2-D) to achieve desired properties. Among them, anisotropic colloidal quasi-twodimensional nanoplates have been attracting a great deal of research enthusiasm. In this work, all-inorganic CsPbBr3 perovskite nanoplates were prepared by precisely controlling the synthesis temperature and time in the hot-injection method. The reaction was performed under the protective atmosphere of nitrogen, at 110 degrees C for 5 s and the reaction mixture was cooled by ice-water bath. Afterwards, the solution was purified by centrifugation at 12000 r min(-1) and the precipitates were dissolved in n-octane. The structure, morphology and optical properties of as-synthesized CsPbBr3 perovskite nanoplates were characterized and analyzed by the series of characterization techniques. The results show that a sharp PL emission was detected at the peak of 500 nm with a narrow full width at the half maximum (FWHM) of 26 nm. The high-resolution transmission electron microscopy (HR-TEM) showed that the as-prepared CsPbBr3 nanoplates were uniform in size, with an average length of 20-21 nm and a thickness of 3-5 nm. All the above studies evidenced that, the improved high temperature-injection method have yielded the CsPbBr3 perovskite nanoplates with uniform size distribution, high color purity and improved optical properties. In addition, light emitting diode (LED) with CsPbBr3 perovskite nanoplates as the perovskite luminescent layer were fabricated by the simple solution spin-coating and vacuum evaporation technique. The device structure of the LED is ITO/PEDOT:PSS/TFB/CsPbBr3 NPs/TPBI/LiF/Al. In the device configuration, the patterned ITO is used as the anode, the spin-coated TFB with larger hole mobility is used as the hole transport layer, vacuum evaporated TPBI is chosen as the electron transport layer, as-prepared CsPbBr3 perovskite nanoplates are used as the light emitting active layer, and the vacuum evaporated LiF as the electron injection layer with Al cathode. The external quantum efficiency (EQE) of 1.71% and the luminous brightness of 297 cd m(-2) was achieved for the LED devices fabricated by the solution method. Moreover, the densification and roughness of CsPbBr3 perovskite nanoplates as the luminescent layers were measured by atomic force microscopy (AFM). The improved efficiency and performance of our device was directly related to the compact and smooth surface of CsPbBr3 luminescent active layer. This result lays a foundation for the fabrication of high efficiency light emitting diode devices by utilizing all-inorganic CsPbBr3, and provides a relatively simple method for the synthesis of CsPbBr3 nanoplates, as well as good repeatability of thin film device fabrication process.

Controllable Modulation of Morphology and Property of CsPbCl3 Perovskite Microcrystals by Vapor Deposition Method

Crystallization Mechanism and Lasing Properties of CsPbBr3 Perovskites by Chemical Vapor Deposition

Efficient Flexible Inorganic Perovskite Light-Emitting Diodes Fabricated with CsPbBr3 Emitters Prepared Via Low-Temperature in Situ Dynamic Thermal Crystallization

Preparation of CsPbBr(3 )perovskite nanocrystals with controllable morphology and in-situ photoluminescenceof formation kinetics

Controlled Morphological Growth and Photonic Lasing in Cesium Lead Bromide Microcrystals

Synthesis and Single Crystal Growth of Perovskite Semiconductor CsPbBr3

Preparation And Photoelectric Properties Of Cspbbr3 Perovskite Nanoplates

Single CsPbBr3 Perovskite Microcrystals: From Microcubes to Microrods with Improved Crystallinity and Green Emission

Precise In-Situ Modulation of Bandgap-Controlled Single-Crystalline Perovskite Microlasers

Photoluminescence and Lasing of Cs4PbBr6 Micro‐Flakes and Micro‐Flowers with Embedded CsPbBr3 Nanocrystals

Morphology, luminescence and the gravity sedimentation effect of flexible and highly stable CsPbBr3 nanocrystal patterns by the inkjet printing method

Unusual Stability and Temperature-Dependent Properties of Highly Emissive CsPbBr 3 Perovskite Nanocrystals Obtained from in Situ Crystallization in Poly(vinylidene difluoride).

Water‐Assisted Size and Shape Control of CsPbBr3 Perovskite Nanocrystals

Solvothermal Synthesis of High-Quality All-Inorganic Cesium Lead Halide Perovskite Nanocrystals: From Nanocube to Ultrathin Nanowire

Defect-modulated Synthesis and Optoelectronic Properties in Chemical Vapor Deposited CsPbBr 3 Microplates

Microwave-Assisted Synthesis Of High-Quality "All-Inorganic'' Cspbx3 (X = Cl, Br, I) Perovskite Nanocrystals And Their Application In Light Emitting Diodes

Defect-modulated synthesis and optoelectronic properties in chemical vapor deposited CsPbBr3 microplates

In Situ Low-Temperature Growth and Superior Luminescent Property of Well-Aligned, High-Quality Cubic CsPbBr3 Micrometer-Scale Single Crystal Arrays on Transparent Conductive Substrates.

Ligand Regulated Selective Synthesis of Cs4PbCl6 Microcrystals in Microemulsion and Their Cathodoluminescence

High-Efficiency CsPbBr3 Light-Emitting Diodes using One-Step Spin-Coating In Situ Dynamic Thermal Crystallization

Ultrastable and high-performance amplified spontaneous emission in centimeter-scale inorganic CsPbBr3 single-crystal thin films