Abstract:This paper presents a fast tool servo (FTS) driven by a voice coil motor (VCM) with a function of self-sensing of cutting forces. Conventionally, cutting force measurement associated with a FTS system is made by integrating an additional force sensor or a dynamometer, which would make the system complicated and influence the dynamic performance of the FTS. Differing from the conventional method, the force measurement in the proposed system is achieved by detecting the current of the VCM and then obtaining the cutting force based on the electromagnetic field distribution of the VCM. Since it is not necessary to integrate additional force sensors, the main body of the FTS could be compact and the dynamics of the FTS would not be influenced by the added function of force measurement. The FTS mainly consists of an air bearing guide driven by a VCM with a stroke of 2.5 mm, an optical encoders feedback system for precision positioning and a hall current sensor for current measurement. To obtain forces from the measured currents, the magnetic field distribution of the VCM is figured out and the nonlinear relationship between the position and the magnetic field distribution is corrected. The basic performances of the FTS for positioning and force measurement were experimentally investigated. It is shown that the system could have a positioning resolution of 20 nm and a force self-sensing resolution of 5 mN based on the proposed method. The proposed method provides a new way for in-process cutting force measurement associated with FTS systems.

A Differential Strategy for Measurement of a Static Force in a Single-Point Diamond Cutting by a Force-Controlled Fast Tool Servo

Auto-tracking Single Point Diamond Cutting on Non-Planar Brittle Material Substrates by a High-Rigidity Force Controlled Fast Tool Servo

Molecular Dynamics Simulation of Subnanometric Tool-Workpiece Contact on a Force Sensor-Integrated Fast Tool Servo for Ultra-Precision Microcutting

Molecular Dynamics Simulation of Elastic–plastic Deformation Associated with Tool–workpiece Contact in Force Sensor–integrated Fast Tool Servo

Development of a Novel Strategy Based on In-Process Compensation of Charge Leakage for Static Force Measurement by Piezoelectric Force Sensors

Self-evaluation of the Cutting Edge Contour of a Microdiamond Tool with a Force Sensor Integrated Fast Tool Servo on an Ultra-Precision Lathe

Three-axial Cutting Force Measurement in Micro/nano-Cutting by Utilizing a Fast Tool Servo with a Smart Tool Holder

On-machine Measurement of Microtool Wear and Cutting Edge Chipping by Using a Diamond Edge Artifact

Self-Sensing of Cutting Forces in Diamond Cutting by Utilizing a Voice Coil Motor-driven Fast Tool Servo

An Ultra-Precision Tool Nanoindentation Instrument for Replication of Single Point Diamond Tool Cutting Edges

Ductile Cutting of Silicon Microstructures with Surface Inclination Measurement and Compensation by Using A Force Sensor Integrated Single Point Diamond Tool

An in-process measurement method for repair of defective microstructures by using a fast tool servo with a force sensor

An Afm-Based Edge Profile Measuring Instrument for Diamond Cutting Tools

D031 Self-Evaluation of Tool Edge Contour of a Single Point Diamond Tool on a Force-Controlled Fast Tool Servo

Design and Adaptive Terminal Sliding Mode Control of a Fast Tool Servo System for Diamond Machining of Freeform Surfaces

Development of a Force Controlled Nanocutting System Using a Flexible Mechanism for Adaptive Cutting of Microstructures on Non-Planar Surfaces

Development of a Voice Coil Motor Based Fast Tool Servo with a Function of Self-Sensing of Cutting Forces

Development of a High-Performance Force Sensing Fast Tool Servo

Design and Analysis of a Piezoelectric Film Embedded Smart Cutting Tool

Design and Control of a Piezoelectrically Actuated Fast Tool Servo for Diamond Turning of Microstructured Surfaces.

Cutting Forces Measurement for Milling Process by Using Working Tables with Integrated PVDF Thin-Film Sensors.