Abstract:The traditional unresolved CFD-DEM method is designed for fluid grid sizes larger than particle sizes, and improved methods are imperative when encountering cases with fluid grid sizes comparable to particle sizes. This study attempts to develop an unresolved CFD-DEM method that applies to different-sized grids and can be easily implemented on commercial platforms using unstructured grids, aiming to greatly help engineers solve engineering problems without investing much effort into choosing appropriate simulation methods and designing fluid grids. To this end, the new method considers interphase force correction at the particle level and field smoothing at the cell level by constructing a spherical search area whose size is determined by particle sizes. Mass conservation is strictly guaranteed in the new method, which is essential to simulations involving chemical reactions. The accuracy and universality of the new method are comprehensively evaluated by two test cases. The first test case is conducted in a spouted bed discretized by unstructured grids of three sizes. The results demonstrate that the new method not only applies to comparable-sized grids but can yield the same predictions as the traditional method in large-sized grids. In other words, the new method is universal as long as grid sizes lie at the unresolved level. Thanks to the simplicity of the algorithm, the new method does not compromise calculation efficiency. The second test case is conducted in a draft tube-type feeder discretized by non-uniform unstructured grids. By comparing with experimental measurements, the main features of flow patterns, pressure drop characteristics, and mass flow rates are reasonably predicted, confirming the capability of the new method to simulate complex gas-solid flows with non-uniform unstructured grids. Users do not need to make any adjustments to the new method once it is implemented on commercial platforms. In the future, the new method can potentially become a universal method to simulate gas-solid flows and greatly help engineers solve engineering problems.

Use of Precise Area Fraction Model for Fine Grid DEM Simulation of ICFB with Large Particles

Use of compromise-based local porosities for coarse grid DEM simulation of bubbling fluidized bed with large particles

Development and Verification of Coarse‐grain CFD‐DEM for Nonspherical Particles in a Gas–solid Fluidized Bed

CFD-DEM Simulation of Fluidized Bed with an Immersed Tube Using a Coarse-Grain Model

Three-Dimensional Porosity Model Based on Volume Solver of Curved Top Cylinder

Study on a Semi-Resolved CFD-DEM Method for Rod-Like Particles in a Gas-Solid Fluidized Bed

Direct Calculation of Voidage in the Fine-Grid CFD–DEM Simulation of Fluidized Beds with Large Particles

Revised Drag Calculation Method for Coarse Grid Lagrangian–Eulerian Simulation of Gas–solid Bubbling Fluidized Bed

CFD-DEM Modeling of Rod-Like Particles in a Fluidized Bed with Complex Geometry

A Dynamic Coarse Grain Discrete Element Method for Gas-Solid Fluidized Beds by Considering Particle-Group Crushing and Polymerization

Development and Verification of an Unresolved CFD-DEM Method Applicable to Different-Sized Grids

An augmented coarse-grained CFD-DEM approach for simulation of fluidized beds

Modeling and validation of coarse-grained computational fluid dynamics–discrete element method for dense gas–solid flow simulation in a bubbling fluidized bed

Development and verification of coarse‐grain CFD‐DEM for non‐spherical particles in a gas‐solid fluidized bed

CFD-DEM Simulation of Fluidization of Polyhedral Particles in a Fluidized Bed

Multi-Scale Simulation of Biomass Gasification in Fluidized Beds

A fine LES-DEM coupled simulation of gas-large particle motion in spouted bed using a conservative virtual volume fraction method

A detailed gas-solid fluidized bed comparison study on CFD-DEM coarse-graining techniques

Coupled Simulation of Fluid-Particle Interaction for Large Complex Granules: A Resolved CFD-DEM Method for Modelling the Air Flow in a Vertical Fixed Bed of Irregular Sinter Particles

Verification of coarse-grained CFD-DEM method in multiple flow regimes

CFD–DEM–VDGM Method for Simulation of Particle Fluidization Behavior in Multi-Ring Inclined-Hole Spouted Fluidized Bed