Abstract:The insufficient ionic conductivity of oxide-based solid electrolytes and the large interfacial resistance between the cathode material and the solid electrolyte severely limit the performance of room-temperature all-solid-state sodium rechargeable batteries. A NASICON solid electrolyte Na3.4Zr1.9Zn0.1Si2.2P0.8O12, with superior room-temperature conductivity of 5.27 × 10–3 S cm–1, is achieved by simultaneous substitution of Zr4+ by aliovalent Zn2+ and P5+ by Si4+ in Na3Zr2Si2PO12. The bulk conductivity and grain boundary conductivity of Na3.4Zr1.9Zn0.1Si2.2P0.8O12 are nearly 20 times and almost 50 times greater than those of pristine Na3Zr2Si2PO12, respectively. The FeS2||polydopamine-Na3.4Zr1.9Zn0.1Si2.2P0.8O12||Na all-solid-state sodium batteries, with a polydopamine modification thin layer between the solid electrolyte and the cathode, maintain a high reversible capacity of 236.5 mAh g–1 at a 0.1 C rate for 100 cycles and a capacity of 133.1 mAh g–1 at 0.5 C for 300 cycles, demonstrating high performance for all-solid-state sodium batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsenergylett.0c01432?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsenergylett.0c01432</a>.Experimental section; XRD, NPD, SEM, and EIS measurements for different solid electrolyte materials; STEM-EDS and DC polarization measurement for Zn0.1 sample; EDS measurement for Zn0.1 sample before and after contact with sodium; unit cell parameters of different solid electrolyte materials; structural parameters of different solid electrolyte materials; BVEL analysis and the comparison of bottleneck sizes; conductivities, activation energies, and relative densities of different solid electrolyte materials; FTIR measurement for Zn0.1 pellet with and without PDA layer; charge–discharge curves of FeS2||Zn0.1||Na all-solid-state battery; comparison of conductivities and battery performances reported in the literature and in this work; cross-sectional images of the cathode/electrolyte interface before and after cycling (<a class="ext-link" href="/doi/suppl/10.1021/acsenergylett.0c01432/suppl_file/nz0c01432_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Material and Interfacial Modification Toward a Stable Room-Temperature Solid-State Na-S Battery.

Development of Stable All-Solid-State Sodium-Sulfur Batteries

Improving Na/Na3Zr2Si2PO12 Interface Via SnOx/Sn Film for High-Performance Solid-State Sodium Metal Batteries

In Situ Forming Na─Sn Alloy/Na2S Interface Layer for Ultrastable Solid State Sodium Batteries

O‐Tailored Microstructure‐Engineered Interface toward Advanced Room Temperature All‐Solid‐State Na Batteries

A Stable Quasi‐Solid‐State Sodium–Sulfur Battery

Stabilizing the Na/Beta-Al2O3 Interface with Mixed Ionic-Electronic Conductor Towards Room-Temperature Solid-State Sodium Metal Battery

Improving Na/Na 3 Zr 2 Si 2 PO 12 Interface via SnO x /Sn Film for High‐Performance Solid‐State Sodium Metal Batteries

Thermal-Induced Cathodic Interface Change on Na3PS4-Based All-Solid-State Sodium Batteries

Composite Solid Electrolyte of Na3PS4-PEO for All-Solid-state SnS2/Na Batteries with Excellent Interfacial Compatibility Between Electrolyte and Na Metal

Ultrastable All-Solid-State Sodium Rechargeable Batteries

Regulating the Interfacial Performance of All-Solid-State Sodium Batteries Using Lanthanum Substitution in a Na3Zr2Si2PO12 Solid Electrolyte

Stable room-temperature sodium-sulfur battery enabled by pre-sodium activated carbon cloth anode and nonflammable localized high-concentration electrolyte

Stable Dendrite‐Free Room Temperature Sodium‐Sulfur Batteries Enabled by a Novel Sodium Thiotellurate Interface

Oxygen-regulated Spontaneous Solid Electrolyte Interphase Enabling Ultra-Stable Solid-State Na Metal Batteries.

Regulating Na/NASCION Electrolyte Interface Chemistry for Stable Solid-State Na Metal Batteries at Room Temperature

Challenges and prospects for room temperature solid-state sodium-sulfur batteries

Phase‐Transition Interlayer Enables High‐Performance Solid‐State Sodium Batteries with Sulfide Solid Electrolyte

A Biphasic Interphase Design Enabling High Performance in Room Temperature Sodium-Sulfur Batteries

Tailoring Na+ Solvation Environment and Electrode–Electrolyte Interphases with Sn(OTf)2 Additive in Non‐flammable Phosphate Electrolytes towards Safe and Efficient Na–S Batteries

High-Performance All-Solid-State Na-S Battery Enabled By Casting-Annealing Technology