Abstract:TS1-20 Abstract: A model has recently been proposed to predict the emission rate of semivolatile organic compounds (SVOCs) from polymer materials. The model was based on data collected in an experimental study that measured emissions of di-2-ethylhexyl phthalate (DEHP) from vinyl flooring. The analysis revealed that although emissions of volatile organic compounds (VOCs) are generally subject to “internal” control (the material-phase diffusion coefficient), emissions of the very low volatility SVOCs (such as DEHP) are subject to “external” control (partitioning into the gas phase, the convective mass-transfer coefficient, and adsorption onto interior surfaces). The analysis showed that adsorption to interior surfaces strongly influences the emission rate. This inference is supported by the recent experimental finding that the presence of indoor dust increases the emission rate of DEHP from vinyl flooring in a test chamber. Compared with the 2 simple chamber systems studied, a regular indoor environment has many other types of surface that will adsorb SVOCs to different extents. The emission rate measured in the test chambers may therefore be vastly different from the actual emission rate from the exact same material into a typical indoor environment. The new model provides a convenient means to estimate the true emission rate and evolving gas phase and adsorbed surface concentrations likely to occur in real indoor environments. The missing information is the adsorption isotherm for DEHP on the different types of indoor surfaces. Although very little information is available on adsorption of DEHP and other SVOCs to indoor surfaces, the recent EPA-sponsored Children's Total Exposure to Persistent Pesticides and Other Persistent Organic Pollutants (CTEPP) study has measured concentrations of di-n-butylpthalate (DBP) in indoor air and on several interior surfaces in a large number of residences and day-care centers. The DBP surface sorption data is used together with estimates of the available surface area of the different classes of materials found indoors to estimate the emission rate and evolving gas-phase concentration after the installation of vinyl flooring in a typical room. Because it is based on fundamental mechanisms and the properties of the specific SVOCs, simple variants of the model should ultimately be able to predict exposure to phthalate plasticizers, brominated flame retardants, biocides, and other SVOCs emitted from a wide range of consumer products and building materials. Although this work was reviewed by EPA and approved for publication, it may not necessarily reflect official agency policy.

C(m)-History Method, a Novel Approach to Simultaneously Measure Source and Sink Parameters Important for Estimating Indoor Exposures to Phthalates.

Characterization of phthalates in sink and source materials: Measurement methods and the impact on exposure assessment

A SPME-based Method for Rapidly and Accurately Measuring the Characteristic Parameter for DEHP Emitted from PVC Floorings

Improved Method for Measuring and Characterizing Phthalate Emissions from Building Materials and Its Application to Exposure Assessment.

A Simple Method To Measure The Gas-Phase Svoc Concentration Adjacent To A Material Surface

A Rapid Micro Chamber Method to Measure SVOC Emission and Transport Model Parameters.

Predicting Residential Exposure to Phthalate Plasticizer Emitted from Vinyl Flooring: Sensitivity, Uncertainty, and Implications for Biomonitoring.

Characterizing the Equilibrium Relationship Between DEHP in PVC Flooring and Air Using a Closed-Chamber SPME Method

Predicting Dermal Exposure to Gas-Phase Semivolatile Organic Compounds (svocs): A Further Study of SVOC Mass Transfer Between Clothing and Skin Surface Lipids

A study of phthalate concentration distribution in indoor environment

Emission of Phthalates from Polymer Materials and Interaction with Interior Surfaces

The Influence of Surface Sorption and Air Flow Rate on Phthalate Emissions from Vinyl Flooring: Measurement and Modeling

Large-scale Chamber Investigation and Simulation of Phthalate Emissions from Vinyl Flooring

Measuring and Predicting the Emission Rate of Phthalate Plasticizer from Vinyl Flooring in a Specially-Designed Chamber.

Time Dependence of Characteristic Parameter for Semi-Volatile Organic Compounds (svocs) Emitted from Indoor Materials

Fate and Transport of Phthalates in Indoor Environments and the Influence of Temperature: A Case Study in a Test House.

Numerical Investigation on the Effect of Ventilation on the Distribution of Phthalate Esters in the Residential Environment

SPME-Based Ca-History Method for Measuring SVOC Diffusion Coefficients in Clothing Material.

Predicting Residential Exposure to Phthalate Plasticizer Emitted from Vinyl Flooring: A Mechanistic Analysis

Emissions of Phthalate Plasticizers from Vinyl Flooring: the Impact of Temperature, Ventilation and Surface Sorption

Dynamic method to measure partition coefficient and mass accommodation coefficient for gas‒particle interaction of phthalates