Abstract:Phthalate emission from vinyl floorings was measured in specially designed stainless steel chambers. Phthalate concentrations increased and reached steady state after 2 to 5 days for all experiments. By having a high ratio of emission surface to sorption surface, avoiding mass loss of phthalates onto sampling pathways, and improving air mixing inside the chamber, the time to reach steady state was significantly reduced, compared to previous studies (1 to 5 months). An innovative approach was developed to determine y0, the gas-phase concentration of phthalates in equilibrium with the material phase, which is the key parameter controlling phthalate emissions. Target phthalate material-phase concentration (C0) and vapor pressure (Vp) were explicitly measured and found to have great influences on the y0 value. For low phthalate concentrations in materials, a simple partitioning mechanism may linearly relate y0 and C0, but cannot be evoked for high-weight phthalate percentages. In addition, the sorption kinetics and adsorption isotherm of phthalates on stainless steel chamber surfaces were determined experimentally. Independently measured or calculated parameters were used to validate a semivolatile organic compounds (SVOCs) emission model, with excellent agreement between model predictions and the observed chamber concentrations in gas and stainless steel phases. With the knowledge of y0 and emission mechanisms, human exposure to phthalates from tested floorings was assessed; the levels were comparable to previous studies. This work developed a rapid, novel method to measure phthalate emissions; emission measurement results can be connected to exposure assessment and help health professionals estimate screening-level exposures associated with SVOCs and conduct risk-based prioritization for SVOC chemicals of concern.

A SPME-based Method for Rapidly and Accurately Measuring the Characteristic Parameter for DEHP Emitted from PVC Floorings

Characterizing the Equilibrium Relationship Between DEHP in PVC Flooring and Air Using a Closed-Chamber SPME Method

Simple and Rapid Analysis of Phthalate Esters in Marine Sediment Using Ultrasound-Assisted Extraction Combined with Gas Purge Microsyringe Extraction Followed by GC-MS.

A Simple Method To Measure The Gas-Phase Svoc Concentration Adjacent To A Material Surface

C(m)-History Method, a Novel Approach to Simultaneously Measure Source and Sink Parameters Important for Estimating Indoor Exposures to Phthalates.

Improved Method for Measuring and Characterizing Phthalate Emissions from Building Materials and Its Application to Exposure Assessment.

Rapid method to measure the concentrations of indoor pollutants by virtue of SPME

Time Dependence of Characteristic Parameter for Semi-Volatile Organic Compounds (svocs) Emitted from Indoor Materials

A Rapid Micro Chamber Method to Measure SVOC Emission and Transport Model Parameters.

Measuring and Predicting the Emission Rate of Phthalate Plasticizer from Vinyl Flooring in a Specially-Designed Chamber.

Quantitative Analysis of Indoor Gaseous Semi-Volatile Organic Compounds Using Solid-Phase Microextraction: Active Sampling and Calibration

A lumped parameter method to determine emission parameters of DEHP in PVC floorings

A reference method for measuring emissions of SVOCs in small chambers

Dynamics of Di-2-ethylhexyl Phthalate (DEHP) in the Indoor Air of an Office

Early Stage C-history Method: Rapid and Accurate Determination of the Key SVOC Emission or Sorption Parameters of Indoor Materials

Dynamic method to measure partition coefficient and mass accommodation coefficient for gas‒particle interaction of phthalates

Transient Method for Determining Indoor Chemical Concentrations Based on Spme: Model Development and Calibration

A Rapid and Accurate Method, Ventilated Chamber C-history Method, of Measuring the Emission Characteristic Parameters of Formaldehyde/vocs in Building Materials

Predicting Emissions Of Svocs From Polymeric Materials And Their Interaction With Airborne Particles

Assessment of gas-phase concentrations of organophosphate flame retardants at the material surface using a midget emission cell coupled to solid-phase microextraction

Characterization of phthalates in sink and source materials: Measurement methods and the impact on exposure assessment