Abstract:In recent years, research on space debris removal technique has received wide attention in aerospace field. Many novel concepts on active flexible debris remover have been proposed, such as flexible flying net, tethered cable manipulator. In view with the high flexibility and large deformation of this kind of structure, the implementation of attitude control is challenging. An accurate dynamic model of highly flexible structure is important and needed. The beam element is the most common element adopted in flexible remover models. So, in this investigation, a rotation field-based curvature shear deformable beam using absolute nodal coordinate formulation (ANCF) (named RB-curvature ANCF beam) is proposed and its geometrically nonlinear characteristic under large deformation motion is studied. Curvature is first derived through planar rotation transformation matrix between the reference frame and current tangent frame of beam centerline, and written as an arc-length derivative of the orientation angle of the tangent vector. Using the geometrically exact beam theory, the strain energy is expressed as an uncoupled form, and the new curvature is adopted to formulate bending energy. Based on the ANCF, the dynamic equation of beam is established, where mass and external force matrices are constant. In order to validate the performance of proposed beam element, other two types of beams are introduced as the comparative models. One is the classical ANCF fully parameterized shear deformable beam derived by continuum mechanics theory, and the other is position field-based curvature ANCF shear deformable beam (named PBcurvature ANCF beam). The PB-curvature model is evaluated by differentiating unit tangent vector of beam centerline with respect to its arc length quoted from differential geometry theory. A series of static analysis, eigenfrequency tests and dynamic analysis are implemented to examine the performance of the proposed element. In static analysis, both small and non-small deformation cases show that the proposed RB-curvature ANCF beam achieves the faster speed, higher precision and good agreement with analytical solution in the case of cantilever beam subjected to a concentrated tip force, which is compared with other two beam models. The eigenfrequency analysis validates RB-curvature ANCF beam in a simply supported beam case that converges to its analytical solution. Meanwhile, the mode shapes of the proposed ANCF beam could be correctly corresponded to vibration state of element with respect to each different eigenfrequency. In the dynamics test, a flexible pendulum case is used and simulation results show that the proposed RB-curvature ANCF beam accords well with ANSYS BEAM3, classical ANCF shear beam and PB-curvature ANCF beam in vertical displacements of tip point and middle point. Since deformation modes are uncoupled in the cross section of proposed beam element, its shear strain is achieved with much better convergence in the case of lower elastic modulus, and shear locking is significantly alleviated, compared with classical ANCF beam. Therefore, RB-curvature ANCF shear deformable beam element proposed in this paper is able to describe accurately geometric nonlinearity in large deformation problem, and can be a potential candidate in the modeling of flexible/rigid-flexible mechanisms.

Large Deflection of a Compliant Beam with Non-uniform Stiffness Distribution Using a PRB-3R Model.

An effective pseudo-rigid-body method for beam-based compliant mechanisms

A Modified Pseudo-Rigid-body Modeling Approach for Compliant Mechanisms with Fixed-Guided Beam Flexures

Pseudo-Rigid-Body Model for Corrugated Cantilever Beam Used in Compliant Mechanisms

Large-Deflection Analysis of General Beams in Contact-Aided Compliant Mechanisms Using Chained Pseudo-Rigid-Body Model

A CPRBM-based Method for Large-Deflection Analysis of Contact-Aided Compliant Mechanisms Considering Beam-to-beam Contacts

Modeling and Analysis of Beam Flexure Based Double Parallel Guiding Mechanisms: A Modified Pseudo-Rigid-Body Approach

A generalized pseudo-rigid-body PPRR model for both straight and circular beams in compliant mechanisms

A Reconfigurable Variable-Stiffness Parallel Beam for Compliant Robotic Mechanisms Towards Safe Human Interaction

A Novel Model To Simulate Flexural Complements In Compliant Sensor Systems

Principle And Performance Analysis Of Soft Continuum Robot With Large Range Variable Stiffness Based On Spherical Particles

Large deformation analysis of the magneto-responsive beam and its applications in flexible grippers and robots

Simplified Dynamical Model and Experimental Verification of an Underwater Hydraulic Soft Robotic Arm

Stiffness Change for Reconfiguration of Inflated Beam Robots

Analysis of Planar Shear Deformable Beam Using Rotation Field Curvature Formulation

Modeling Large Spatial Deflections of Slender Beams of Rectangular Cross Sections in Compliant Mechanisms

A Novel Rotating Beam Link For Variable Stiffness Robotic Arms

A 3-Dof Pseudo-Rigid-Body Model for Tension-Based Compliant Bistable Mechanisms

Model Analysis of Robotic Soft Arms including External Force Effects

Discrete Deformation Models for Real-Time Computation of Compliant Mechanisms in Two- and Three-Dimensional Space

Kinematic Modeling and Control of a Soft Robotic Arm with Non-constant Curvature Deformation