Dual Injection Enhanced Planar Gate IGBT with Self-Adaptive Hole Path for Better Trade-off and Higher SOA Capability
Jinping Zhang,Yunxiang Huang,Jiang Liu,Xiang Xiao,Bo Zhang
DOI: https://doi.org/10.1088/1361-6641/ac97ba
IF: 2.048
2022-01-01
Semiconductor Science and Technology
Abstract:A novel dual injection enhanced planar gate insulated gate bipolar transistor (IGBT) with self-adaptive hole path (DIE-PIGBT) is proposed. A floating-P region is applied behind the emitter-connected deep trench in z direction and contacted with the N-type carrier stored (N-CS) layer for the proposed IGBT. Compared to the conventional trench shielded planar gate IGBT (CTS-PIGBT), the proposed device further alleviates the negative impact of the N-CS layer on the breakdown voltage (BV) and reduces both the on-state voltage drop (V (ceon)) and saturated collector current density (J (sat)). Simulation results show that with the same device thickness of 400 mu m, the BV are 4625 V and 4275 V for the proposed and conventional device, respectively. The V (ceon) at 75 A cm(-2) is 2.51 V for the proposed DIE-PIGBT, which is 1.13 V lower than that of the CTS-PIGBT. Furthermore, with similar BV to the conventional one, the device thickness can be reduced to 355 mu m for the DIE-PIGBT. Pro. The total gate charge (Q (G)) and miller plateau charge (Q (GC)) for the proposed device are reduced by 61.0% and 89.9%, respectively. As a result, the proposed structure has better trade-off relationship between the V (ceon) and turn-off loss (E (off)). At the same V (ceon) of 2.51 V, the E (off) for the DIE-PIGBT and DIE-PIGBT. Pro are 45.17 mJ cm(-2) and 41.01 mJ cm(-2), which is reduced by 44.0% and 49.1% when compared to 80.61 mJ cm(-2) of the CTS-PIGBT, respectively. Moreover, the J (sat) is reduced from 619 A cm(-2) for the CTS-PIGBT to 368 A cm(-2) for the DIE-PIGBT under the V (ge) of 15 V. The short-circuit withstand time of the DIE-PIGBT is 1.9 times larger than that of the conventional device.