Abstract:As the key connecting components between tower and conductors, electric power fittings play an important role in the provision of the safe operation of transmission lines. Taking 500 kV transmission lines as the research object, electric power fittings failure in heavy icing areas is studied. The following three questions are considered: first, the influence of different ice-shedding methods on the tension of quad bundle conductors; second, the influence of the spans number, span length, height difference, and ice thickness on the conductor tension under the most dangerous ice-shedding mode; lastly, the mechanical characteristics of tension string and suspension string under ice-shedding condition in the stable wind. The results show that the von Mises stress of the parts that connect with the iced conductor in the tension string model is greater than those of the parts connected with the ice-shedding conductor. What is more, the shackle is the most vulnerable part of the whole model, which is prone to wear and damage, and the failure is most likely to occur at the upper shackle. The middle part in the rectangular hanging plate which is connected with the iced conductor is prone to damage, for its maximum stress has already exceeded the yield stress, with a danger degree inferior only to the shackle. In the suspension string model, the von Mises stress of each part is relatively small and does not reach the yield stress. Similarly, the shackle is most likely to be damaged in the overall model, while other parts maintain larger safety margins. The structure of the parts with smaller stress can be optimized according to the simulation results where design margins may be reduced and additional cost benefits realized.

Study of Inverted T-shape Insulator Strings in Icing Conditions

Experimental Study on the Flashover Characteristics of 500 Kv AC Ice-covered Insulator String under Different Arrangement

Study of the effect of ice adhesion on electrical power transmission insulator

Study on AC Flashover Process of Iced 110 kV Insulator Strings

Icing Flashover Performance of HVDC Transmission Lines

Flashover Performance of HVDC Iced Insulator Strings

Anti-icing Flashover Research on Flower Arrangement Insulator and V-type Insulator String of Transmission Lines in Ice Area

Icing flashover characteristics and discharge process of 500 kV AC transmission line suspension insulator strings

Icing Flashover Characteristics of EHV AC Transmission Line Insulator Strings

Experimental Investigation on Insulation Configuration for Antiicing on Transmission Lines in Ice Zone

Statistical analysis on the DC discharge path of ice-covered insulators under natural conditions

Study on the Icing Flashover Characteristics of Porcelain Double Sheds Suspension Insulator String

Wet Snow Flashover Characteristics of 500-Kv AC Insulator Strings with Different Arrangements

Icing Flashover Leakage Current of Long Insulator Strings in 500 Kv Transmission Line

Wet snow flashover characteristics of the insulator strings in ' Λ ' Shape on 500 kV transmission lines

Prevention Measures for Flashover Performance of Insulators under Icing Conditions on 330kv Overhead Transmission Lines

Evaluation of insulator string’s icing status based on leakage current

Leakage Current Characteristics of Pre-flashover along Ice-covered Insulator String

AC Electric Characteristics of the Ice-covered 110 Kv Glass Insulator Strings

Numerical Simulation of the Dynamic Responses of Electric Power Fitting of Transmission Lines after Ice Shedding

Experimental study on electrical characteristics of iced glass suspension ground wire insulator