Abstract:This brief presents a dual-band balanced filter with wide stopband, controllable transmission zeros and bandwidths, and compact size based on a newly designed electromagnetically coupled stepped impedance resonator (SIR) pair. The proposed SIR contains three different impedance lines, which can lead to more degrees of design freedom for resonant frequency control. Two electrical length ratios of the SIR can be individually tuned to obtain two desired differential-mode (DM) resonant frequencies for dual-band design, while keeping the first spurious frequency far away for wide-stopband design. Moreover, an inherent common-mode (CM) suppression can also be obtained without adding extra structures due to the discriminating CM resonant frequencies. The mechanism of transmission zeros (TZs) generation is also investigated by means of phases and admittance analysis. It reveals that four TZs around the two operating bands can be flexibly controlled via adjusting the ratio of magnetic and electric coupling coefficients of the SIR pair as well as the coupling space of the feeding lines, which have greatly enhanced the passband selectivities and the band-to-band isolation. Subsequently, the graphs of coupling coefficients and external quality factors for the filter design are extracted, showing sufficient degrees of design freedom for bandwidth control. The proposed dual-band balanced filter is finally fabricated and measured at 1.75 GHz and 3.64 GHz, respectively. Measured results are in good agreement with the simulated ones. Compared with the state-of-the-art works, the proposed circuit performs a deeper and wider stopband of 4.5f 1 d with 40dB attenuation (where f 1 d is the fundamental frequency), and more than 50-/45-dB in-band CM suppressions with compact size (0.14λ g × 0.27λ g , where λ g is the guided wavelength of the fundamental frequency).

Dual-Band Filter Based On Commensurate-Line Network

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Dual‐wideband Bandstop Filter Using Stepped Impedance Coupled‐lines

Compact Dual-Band Narrowband Bandpass Filter with Small Frequency Ratio

DUAL-MODE BPF WITH FOUR TRANSMISSION ZEROS USING S-L COUPLING STRUCTURE WITH QUADRATIC FUNCTION COUPLING COEFFICIENT

Bandpass Filter Using Three Pairs of Coupled Lines with Multiple Transmission Zeros

Dual-Band Bandpass Filter with Multiple Controllable Transmission Zeroes and Wide Stopband

Compact Microstrip Dual-Band Bandpass Filter with Multiple Transmission Zeros

Compact Dual-Band Bandpass Filter Using Stepped Impedance Resonators

Novel compact band-pass filter with three transmission zeros

High-selectivity Bandpass Filter Using Six Pairs of Quarter-Wavelength Coupled Lines

A compact dual‐band bandpass filter based on coupled stub‐loaded square ring resonators by using transversal signal‐interaction concepts

Compact Dual‐band Bandpass Filter Using Coupled Lines and Shorted Stubs

Compact Wide-Stopband Dual-Band Balanced Filter Using an Electromagnetically Coupled SIR Pair with Controllable Transmission Zeros and Bandwidths.

Dual-mode resonator filter with improved feed-lines for dual-band applications

COMPACT MIXED-CROSS COUPLED BANDPASS FILTER WITH ENHANCED FREQUENCY SELECTIVITY

Design of On-Chip Dual-Band Bandpass Filter Using Lumped Elements in LTCC Technology

A planar three-section coupled-line high-selectivity wideband bandstop filter

Compact Quad-Band Bandpass Filter Based on Sextuple-Mode Stepped Impedance Stub-Loaded Resonator

Compact, Multilayer 5G Filter Based on Extracted-Pole Shielded Lumped Resonators