Abstract:In this study, a low-pass filter with coaxial transmission lines is designed and produced. The objective for designing a coaxial low-pass filter was to utilize both low-loss transmission and high breakdown voltage capability for high power microwave applications to enable the suppression of the second harmonic of the 4.4-6 GHz C-Band (C-Band was selected as a proof of concept) signals with minimal insertion loss. Microwave and 3D electromagnetic simulators were used in the filter design. The design was started by establishing an 11 th order Chebyshev low-pass filter prototype giving 0.05 dB ripple. Based on this prototype, a filter circuit consisting of capacitors and inductors as lumped elements was designed. The low and high impedances to be selected for the stepped impedance method, which is the basis of the transition to coaxial transmission lines, were decided and the most suitable impedances for manufacturing was determined. The filter using these impedances and designed with stepped impedance lines was transformed into the filter in which coaxial transmission lines are used. Coaxial transmission lines in the low-pass filter circuit consist of conductors with an insulating material in between. While the insulating material is selected as air in the high impedance sections of the transmission lines, it is PTFE (Polytetrafluoroethylene) with an insulating constant of 2.1 in the low impedance sections. The designed filter was manufactured. The basic properties of the manufactured filter were characterized by using RF measuring devices and compared with the designed filter. The measurements results proved that the frequency responses of the designed filter and the produced filter were very close to each other. Namely, a low-pass filter with a cutoff frequency of 6 GHz, a sharp suppression of about 45 dB at the stopband of 9 GHz and a return loss of 20 dB was designed and produced by using coaxial transmission lines. The novelty in our work can be stated that the - ower handling capability is increased by two techniques. The first one is that the highest transmission line radius preventing the higher order mode excitations is used to decrease the conductor loss. Teflon is covered around the low impedance lines to enhance the dielectric breakdown capability. Teflon inclusion is also used to decrease the practical low impedance level that improves the filter characteristics.

Microfabrication of Coaxial Filter without Internal Conductor Support

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Novel microstrip bandpass filter with multiple transmission zeros and wide stopband

A W‐band Air‐filled Coaxial Bandpass Filter Employing Micro Metal Additive Manufacturing Technology

Design and Fabrication of a Five-Order Narrow-Band Coaxial Filter based on Cross-Coupling and Non-Cross-Coupling Methods

A Compact Fourth-order Bandpass Filter with High Selectivity and Out-of-band Suppression

Design of an Additively-Manufactured Self-Supported All-Metal Coaxial-Line X-Band Bandpass Filter

Design of Miniaturized Substrate Integrated Coaxial Line Bandpass Filters with Quarter-Wavelength Spiral Resonator

Compact microstrip bandpass filter based on hybrid half-and quarter-wavelength resonators

Compact Single- and Dual-Band Filtering 180° Hybrid Couplers on Circular Patch Resonator

Design of Coaxial Line Low Pass Filter

Compact Fourth/third Order Dual‐band Bandpass Filter with Independently Controllable Passbands

Miniaturized mixed electric and magnetic coupling bandpass filter based on interdigital resonator

Miniaturized Single Band Filter with Wide Outer-band Rejection at Higher Frequencies

Coaxial Low-Pass Filter Design and Manufacture

Miniaturized Triple-Band Filter Design Utilizing Composite Planar Multilayered and Substrate Integrated Waveguide Structures

A W-Band Bandpass Filter with Dual Behavior Resonators Fabricated by Additive Manufacturing

Co-design of Low Profile Single-Fed Circularly Polarized Filtering Antenna with High Out-of-band Rejection

A Monolithic Stereolithography 3-D Printed Ka-band Spherical Resonator Bandpass Filter

A High-Selectivity Filtering Antenna Based on Dual-Post Coaxial Resonators