Abstract:In this communication, a single-layer, wideband, differential-fed filtering antenna with high selectivity is proposed. The developed filtering antenna possesses a simple structure and consists of a square patch, a square substrate integrated waveguide (SIW) cavity, a pair of symbiotic stepped impedance resonators (SSIRs), and a pair of complementary split ring resonators (CSRRs). The SIW cavity formed with sparse metalized posts is embedded in the square patch, and the impedance bandwidth can be broadened by merging the TM10 mode of the square patch, excited by the electromagnetic energy escaping from the sparse posts, with the TE210 mode in the SIW cavity through differential excitation. The SSIRs are connected with both radiating edges of the square patch. And two extra in-band resonances together with an upper-edge radiation null are simultaneously generated, so the impedance bandwidth and the frequency selectivity at the higher stopband can be significantly improved. The CSRRs, surrounding the differential excitation ports, are etched into the bottom surface of the SIW cavity, and a lower-edge radiation null is produced to further sharpen the roll-off rate. By adjusting the geometrical parameters of the SSIRs and CSRRs, the positions of the two radiation nulls can be independently controlled. For verifying the design method, a prototype of the developed single-layer filtering antenna has been fabricated and tested. The measurement results are well consistent with the simulated values, indicating good performance with a large −10 dB fractional impedance bandwidth of 21.2%, a peak realized gain of 9.3 dBi, two out-of-band rejection levels of more than 26 dB, and very high selectivity.

A High-Selectivity Filtering Antenna Based on Dual-Post Coaxial Resonators

A Compact Dual-Mode Microstrip Filter Using Hexagonal Resonator and Capacitive Loading Technique

Design of compact dual-band quasi-elliptic filter with high selectivity and wide stopband rejection

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

A Compact High-Selectivity Wideband Filtering Antenna With Multipath Coupling Structure

Co-design of Low Profile Single-Fed Circularly Polarized Filtering Antenna with High Out-of-band Rejection

Design of a compact filtering antenna with multi-adjustable radiation nulls

A compact coupling-fed omnidirectional wideband filtering antenna with high selectivity

Development of Low-Profile Filtering Antennas with Dual-Mode Cavities

Design of Dual‐mode Dual‐band Rectangular Waveguide Filtering Antenna

A Single-Layer Wideband Differential-Fed Filtering Antenna With High Selectivity

An Efficient Dual‐band Filter‐antenna Design Based on Simplified Integration Methodology

A High Selectivity Filter Antenna Array for Generating Dual-Mode OAM

Design of Dual-band Filtering Antenna Based on 3-D Printed Half-mode Gap Waveguide Quadruple-mode Resonator

Design of a Dual-Stopband Waveguide Slot Filtenna with Double-T-connected Resonators

Design of Dual-Stopband Rectangular Waveguide Slot Array Antennas

Codesigned High-Efficiency Single-Layered Substrate Integrated Waveguide Filtering Antenna with a Controllable Radiation Null

Design of a Wideband Parallel-Coupled Filtering Antenna Based on Dual-Frequency Matching Condition

A High Selectivity and High Efficiency Filtering Antenna With Controllable Radiation Nulls Based on Stacked Patches

Dual High-Selectivity Band-Notched UWB Monopole Antenna Using Simple Dual-Mode Resonator and High-Impedance Lines

Dual-mode Substrate Integrated Hexagonal Cavity (SIHC) Filter with Uncoaxial Feeding Structure