Abstract:In this study, a low-pass filter with coaxial transmission lines is designed and produced. The objective for designing a coaxial low-pass filter was to utilize both low-loss transmission and high breakdown voltage capability for high power microwave applications to enable the suppression of the second harmonic of the 4.4-6 GHz C-Band (C-Band was selected as a proof of concept) signals with minimal insertion loss. Microwave and 3D electromagnetic simulators were used in the filter design. The design was started by establishing an 11 th order Chebyshev low-pass filter prototype giving 0.05 dB ripple. Based on this prototype, a filter circuit consisting of capacitors and inductors as lumped elements was designed. The low and high impedances to be selected for the stepped impedance method, which is the basis of the transition to coaxial transmission lines, were decided and the most suitable impedances for manufacturing was determined. The filter using these impedances and designed with stepped impedance lines was transformed into the filter in which coaxial transmission lines are used. Coaxial transmission lines in the low-pass filter circuit consist of conductors with an insulating material in between. While the insulating material is selected as air in the high impedance sections of the transmission lines, it is PTFE (Polytetrafluoroethylene) with an insulating constant of 2.1 in the low impedance sections. The designed filter was manufactured. The basic properties of the manufactured filter were characterized by using RF measuring devices and compared with the designed filter. The measurements results proved that the frequency responses of the designed filter and the produced filter were very close to each other. Namely, a low-pass filter with a cutoff frequency of 6 GHz, a sharp suppression of about 45 dB at the stopband of 9 GHz and a return loss of 20 dB was designed and produced by using coaxial transmission lines. The novelty in our work can be stated that the - ower handling capability is increased by two techniques. The first one is that the highest transmission line radius preventing the higher order mode excitations is used to decrease the conductor loss. Teflon is covered around the low impedance lines to enhance the dielectric breakdown capability. Teflon inclusion is also used to decrease the practical low impedance level that improves the filter characteristics.

Design and Fabrication of a Five-Order Narrow-Band Coaxial Filter based on Cross-Coupling and Non-Cross-Coupling Methods

Compact cross-coupled circular cavity filters using multilayer substrate integrated waveguide

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

A Multilayer Dual-Band Coupler Based on Composite Right/left-Handed Folded Substrate Integrated Waveguide

Design of compact dual-band quasi-elliptic filter with high selectivity and wide stopband rejection

Microfabrication of Coaxial Filter without Internal Conductor Support

Fast Design and Tuning of Miniaturized Cross-coupled Cavity Filter

Coaxial Low-Pass Filter Design and Manufacture

Design of an Economical Compact Coaxial Cavity Combline Filter for 3G TD Base Station

Filter design for folded canonical topologies based on equivalent circuit segmentation

A Novel Narrowband Filter with Cross-Coupling Used for System-in-package Applications

Compact Single- and Dual-Band Filtering 180° Hybrid Couplers on Circular Patch Resonator

NOVEL COMPACT MULTILAYER CROSS-COUPLED FILTER WITH ENHANCED INNER COUPLING SCHEME

A General Method for Implementing Flexible Filter Design Based on Nested Substrate Integrated Waveguide Circular Cavity and Cambered Cavity

Design of Coaxial Line Low Pass Filter

A Simple and General Method for Cross-Coupled Bandpass Filters Based on Circular Patch Resonator

Design of Small Cross-coupled Cavity Filter

Analysis and Design of an Ultra-Wideband Nested Coaxial Waveguide Feed

Design of a Narrow-Band Dual-Mode Circular Waveguide Filter

A 3-D Printed Ku-Band Waveguide Filter Based on Novel Rotary Coupling Structure

Compact and Wide Stopband Bandpass Filters Based on Dual-Mode Folded Circular Substrate Integrated Waveguide Cavities