Abstract:Once strain localization occurs in softening solids, inelastic loading behavior is restricted within a narrow band while the bulk unloads elastically. Accordingly, localized failure in solids can be approached by embedding or smearing a traction-based inelastic discontinuity (band) within an (equivalent) elastic matrix along a specific orientation. In this context, the conformity of the strong/regularized and embedded/smeared discontinuity approaches are investigated, regarding the strategies dealing with the kinematics and statics. On one hand, the traction continuity condition imposed in weak form results in the strong and regularized discontinuity approaches, with respect to the approximation of displacement and strain discontinuities. In addition to the elastic bulk, consistent plastic-damage cohesive models for the discontinuities are established. The conformity between the strong discontinuity approach and its regularized counterpart is shown through the fracture energy analysis. On the other hand, the traction continuity condition can also be enforced point-wisely in strong form so that the standard principle of virtual work applies. In this case, the static constraint resulting from traction continuity can be used to eliminate the kinematic variable associated with the discontinuity (band) at the material level. This strategy leads to embedded and smeared discontinuity models for the overall weakened solid which can also be cast into the elastoplastic degradation framework with a different kinematic decomposition. Being equivalent to the kinematic constraint guaranteeing stress continuity upon strain localization, Mohr’s maximization postulate is adopted for the determination of the discontinuity orientation. Closed-form results are presented in plane stress conditions, with the classical Rankine, Mohr–Coulomb, von Mises and Drucker–Prager criteria as illustrative examples. The orientation of the discontinuity (band) and the stress-based failure criteria consistent with the given traction-based counterparts are derived. Finally, a generic failure criterion of either elliptic, parabolic or hyperbolic type, appropriate for the modeling of mixed-mode failure, is analyzed in a unified manner. Furthermore, a novel method is proposed to calibrate the involved mesoscopic parameters from available macroscopic test data, which is then validated against Willam’s numerical test.

Failure criterion for highly stretchable elastomers under triaxial loading

A unified expression of elastic-plastic notch stress-strain calculation in bodies subjected to multiaxial cyclic loading

Energy-Based Strength Theory for Soft Elastic Membranes

Large Strained Fracture of Nearly Incompressible Hyperelastic Materials: Enhanced Assumed Strain Methods and Energy Decomposition

Analysis of Large Deformation and Fracture of Axisymmetric Tensile Specimens

A Model for Rubberlike Elasticity Up to Failure

Two Possible Defect Growth Modes in Soft Solids

A Novel Three Dimensional Failure Criterion for Quasi-Brittle Materials Based on Multi-Scale Damage Approach

Large Elastic Deformations of Soft Solids Up to Failure: New Hyperelastic Models with Error Estimation

A size‐dependent energy‐based strain burst criterion

Interfacial fatigue fracture of elastomer bilayers under cyclic large deformation

Ductile rupture under cyclic loadings at high triaxiality: The influence of strain hardening and elasticity

A New Ductile Failure Criterion with Stress Triaxiality and Lode Dependence

The Uniaxial Stress–Strain Relationship of Hyperelastic Material Models of Rubber Cracks in the Platens of Papermaking Machines Based on Nonlinear Strain and Stress Measurements with the Finite Element Method

Determination of Multiaxial Stress Rupture Criteria for Creeping Materials: A Critical Analysis of Different Approaches

Stress Triaxiality in Anisotropic Metal Sheets—Definition and Experimental Acquisition for Numerical Damage Prediction

Essential work of fracture of soft elastomers

Hyperelastic effects in brittle materials failure

Large deformation isotropic elasticity – on the correlation of theory and experiment for incompressible rubberlike solids

An Experimental Study on Strain-Based Failure Criteria of Brittle Materials

On the conformity of strong, regularized, embedded and smeared discontinuity approaches for the modeling of localized failure in solids