Abstract:The presence of flaw in solid materials can lead to stress concentration, resulting in the reduction of rupture stress and stretchability of material. When the flaw is sufficiently smaller than a material-specific length, referred to as flaw sensitivity length, the material exhibits flaw insensitivity. The flaw sensitivity length is a critical material property that reflects how the material is sensitive or insensitive to crack. However, the impact of crack length on the load-bearing process of material remains an open problem. In this work, we characterize the flaw sensitivity of a stretchable material, bacterial cellulose hydrogel, under monotonic and cyclic loadings. Through fracture and fatigue tests, we first determine that the hydrogel exhibits high fracture toughness and fatigue resistance. We next characterize the flaw sensitivity of the hydrogel through two visualized experimental methods. Photoelasticity observation on the stress distribution in samples during loading shows that the samples with cracks below 2 mm exhibit uniform stress distribution during the deformation process, while those with cracks above 2 mm experience stress concentration at crack tip. Scanning electron microscope observation on the microstructure morphology of samples under fixed stretch shows that the samples with cracks below 2 mm exhibit uniform alignment of nanofibers, while those with cracks above 2 mm exhibit more intense alignment and even bundling of nanofibers at crack tip. Similar trends are observed in the samples under cyclic loading, where the transition length is also about 2 mm. Notably, the flaw sensitivity lengths obtained by the visualized methods agree well with that obtained by direct measurement of rupture stress and theoretical estimations under monotonic and cyclic loadings. The methods offer novel way to study the flaw sensitivity of materials, thereby contributing to the exploration of failure mechanisms.

Cavitation/fracture transition of soft materials

The Intimate Relationship between Cavitation and Fracture

Interfacial cavitation

Two Possible Defect Growth Modes in Soft Solids

Direct observation on the surface fracture of ultrathin film double-network hydrogels

Effect of Random Fiber Network and Fracture Toughness on the Onset of Cavitation in Soft Materials

Size-dependent Inertial Cavitation of Soft Materials

Fracture Process of Microgel-Reinforced Hydrogels under Uniaxial Tension

Flaw-sensitivity of a tough hydrogel under monotonic and cyclic loads

The Fracture of Highly Deformable Soft Materials: A Tale of Two Length Scales

Essential work of fracture of soft elastomers

Linking cavitation and fracture to molecular scale structural damage of model networks

Size selection of crack front defects: Multiple fracture-plane interactions and intrinsic lengthscales

Predicting fracture energies and crack-tip fields of soft tough materials

Size-dependent fracture in elastomers: experiments and continuum modeling

Quantifying and mapping covalent bond scission during elastomer fracture

Cavitation in a soft porous material

Fracture and adhesion of soft materials: a review

Flaw sensitivity of bacterial cellulose hydrogel under monotonic and cyclic loadings

Fracture of tough and stiff metallosupramolecular hydrogels

3D characterization of kinematic fields and poroelastic swelling near the tip of a propagating crack in a hydrogel