Abstract:In this work, tungsten-containing TaTiWVCr refractory high entropy alloy (RHEA) and tungsten (W) films with amorphous structures were irradiated by a 60 keV helium (He) ion beam platform, the fluences were ranging from 1 × 1016 cm−2 to 2 × 1017 cm−2. Results showed that the crystallization phenomenon in RHEA initially happened at fluence of 5 × 1016 cm−2. Meanwhile, the obvious crystallization in W films was induced at the highest fluence of 2 × 1017 cm−2. This indicated that the crystallization and the grain growth in TaTiWVCr RHEA amorphous films were more easily occurred than that of W films when exposed to the same He + environment. The prominent electronic stopping power and He + energy deposition induced electron excitation played vital role in producing inelastic thermal-spikes via electron-phonon coupling, which was contributed to the crystallization kinetic energy and the overall grain growth in irradiated regions. The phase structure of RHEA film kept stable up to the highest fluence of 2 × 1017 cm−2, even though the alloy elements demonstrated local short-range segregation due to the diffusion-driven crystallization and the formation of highly-pressurized bubbles in the irradiated RHEA. In contrast to the W, smaller-sized bubbles and less dislocations were mainly distributed in the irradiated region of RHEA due to its naturally special high entropy effect and high lattice distortion. Besides, the results of irradiation-induced superficial morphology and volume swelling revealed that the RHEA exhibited more excellent swelling resistance than that of W. This study will potentially provided a useful indicator of RHEA with self-healing stability to resist irradiation and promote the development of state-of-the-art plasma-facing materials for the future nuclear fusion.

Effect of pre-damage induced by argon ions on the following 60 keV helium ions irradiation behavior of tungsten-tantalum alloy

Influence of heavy ions pre-damage on the blistering and helium bubble in tungsten under helium ions irradiation

Properties of Potassium Doped and Tantalum Containing Tungsten after Heavy Ion Irradiation

The effect of W2+ irradiation and He+ exposure on W-Ta alloy fabricated via SPS

Effect of the Displacement Damage from Argon Ion Irradiation on the Synergistic Effect of Helium–hydrogen in Tungsten

Effect of helium pre-implantation on the thermal shock performance of tungsten

Surface Modification of W–V Alloy Exposed to High Heat Flux Helium Neutral Beams

Effects of Tantalum Alloying on Surface Morphology and Deuterium Retention in Tungsten Exposed to Deuterium Plasma

Influence of helium ion irradiation damage behavior after laser thermal shock of W-2%vol Y<sub>2</sub>O<sub>3</sub> composites

Molecular dynamics simulation of primary radiation damage in W-Ta alloys: Effect of tantalum

Helium-induced Hardening Effect in Polycrystalline Tungsten

A comparative study of irradiation response in amorphous TaTiWVCr refractory high entropy alloy with the counterpart of tungsten films

Influence of Au Ions Irradiation Damage on Helium Implanted Tungsten

Helium ions irradiation of tantalum-zirconium carbide thin films: The effect of acetylene gas contents

Helium effects on the surface and subsurface evolutions in single-crystalline tungsten

Blistering Behavior and Deuterium Retention in Tungsten Vanadium Alloys Exposed to Deuterium Plasma in the Linear Plasma Device STEP

Effect of 3 MeV Fe<SUP>11+</SUP> ions pre-damage on blistering and deuterium retention in two tungsten grades

Effect of Y2O3 particles on the helium ion irradiation damage of W-2%Y2O3 composite prepared by wet chemical method

Helium Radiation Blistering Mechanisms in Tungsten: Ion Channeling Effects

Effect of 3 MeV Fe11+ ions pre-damage on blistering and deuterium retention in two tungsten grades

Characterization of dose dependent mechanical properties in helium implanted tungsten