Abstract:A comprehensive CFD–DEM numerical model has been developed to simulate the biomass gasification process in a fluidized bed reactor. The methodology is based on an Eulerian–Lagrangian concept, which uses an Eulerian method for gas phase and a discrete element method (DEM) for particle phase. Each particle is individually tracked and associated with multiple physical (size, density, composition, and temperature) and thermo-chemical (reactive or inert) properties. Particle collisions, hydrodynamics of dense gas-particle flow in fluidized beds, turbulence, heat and mass transfer, radiation, particle shrinkage, pyrolysis, and homogeneous and heterogeneous chemical reactions are all considered during biomass gasification with steam. A sensitivity analysis is performed to test the integrated model׳s response to variations in three different operating parameters (reactor temperature, steam/biomass mass ratio, and biomass injection position). Simulation results are analyzed both qualitatively and quantitatively in terms of particle flow pattern, particle mixing and entrainment, bed pressure drop, product gas composition, and carbon conversion. Results show that higher temperatures are favorable for the products in endothermic reactions (e.g. H2 and CO). With the increase of steam/biomass mass ratio, H2 and CO2 concentrations increase while CO concentration decreases. The carbon conversion decreases as the height of injection point increases owing to both an increase of solid entrainment and a decrease of particle residence time and particle temperature. Meanwhile, the calculated results compare well with the experimental data available in the literature. This indicates that the proposed CFD–DEM model and simulations are successful and it can play an important role in the multi-scale modeling of biomass gasification or combustion in fluidized bed reactor.

CFD-DEM Coupled with Thermochemical Sub-Models for Biomass Gasification: Validation and Sensitivity Analysis

Simulation of Biomass Pyrolysis in a Rotary Drum by Coupling CFD-DEM with a One-Dimensional Thermally Thick Model

Multi-Scale Simulation of Biomass Gasification in Fluidized Beds

CFD–DEM simulation of biomass gasification with steam in a fluidized bed reactor

CFD Modelling of the Co-Gasification of Biomass and Coal Particles in Fluidised Beds

Numerical Investigation of Biomass Pyrolysis Performance in a Fluidized-Bed Reactor by a TFM-DEM Hybrid Model

Advanced Modeling Approaches for CFD Simulations of Coal Combustion and Gasification

CFD investigation of the complex multiphase flow of biomass gasification in industrial-scale dual fluidized bed reactor

CFD-DEM Simulation of Biomass Pyrolysis in Fluidized-Bed Reactor with a Multistep Kinetic Scheme

Comprehensive DEM-CFD model and thermal uniformity optimization for biomass catalytic pyrolysis reactor

CFD modeling of biomass combustion and gasification in fluidized bed reactors using a distribution kernel method

CFD Simulation of the Steam Gasification of Millimeter-Sized Char Particle Using Thermally Thick Treatment

CFD-DEM Modeling of Rod-Like Particles in a Fluidized Bed with Complex Geometry

Study of air-steam gasification of spherocylindrical biomass particles in a fluidized bed by using CFD-DEM coupling with the multi-sphere model

Essential aspects of the CFD software modelling of biomass gasification processes in downdraft reactors

Combustion Modeling Of Cfb Boiler Furnace Based On An Euler-Euler Approach

3D numerical simulation of Texaco gasifier using assumed PDF model

Comparative analysis on gas–solid drag models in MFIX-DEM simulations of bubbling fluidized bed

Biomass Moving Bed Combustion Analysis via Two-Way Coupling of Solid–Fluid Interactions Using Discrete Element Method and Computational Fluid Dynamics Method

CFD-DEM Simulation of Heat Transfer in Fluidized Beds: Model Verification, Validation, and Application

CFD-DEM simulations of municipal solid waste gasification in a pilot-scale direct-melting furnace