Regulating the Heat Generation Power of a LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode by Coating with Reduced Graphene Oxide
Yunpeng Zhuang,Wenzhuo Shen,Jiawei Yan,Lei Wang,Chao Zhou,Puyi Lei,Min Zhong,Jiali Zhang,Shouwu Guo
DOI: https://doi.org/10.1021/acsaem.2c00026
IF: 6.4
2022-04-14
ACS Applied Energy Materials
Abstract:Heat generation, accumulation, and runaway severely affect the practical applications of lithium-ion batteries (LIBs) using Ni-rich Ni/Co/Mn ternary cathode materials. In principle, the aforementioned thermal characteristics of a LIB are mainly determined by the heat generation power of the cathode and anode materials during charging/discharging. In this work, the heat generation power of the LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode material coated with and without reduced graphene oxide (rGO) is studied systematically. By coupling an electrochemical workstation with a multichannel microcalorimeter, the heat generation power of NCM811 under different charging/discharging conditions was measured on coin cells. Meanwhile, a theoretical model was also proposed to analyze the intrinsic factors of the NCM811 that possibly affect its heat generation power during electrochemical charging/discharging. The results show that the particle size, lithium-ion diffusion coefficient, specific heat capacity, thermal conductivity, and electric conductivity can all affect the heat generation power. Different from that, the particle size and the lithium-ion diffusion coefficient of NCM811 are the dominating factors. It is demonstrated further that by coating rGO onto NCM811, the lithium-ion diffusion coefficient of NCM811 is improved, and the heat generation power is reduced accordingly.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.2c00026.Schematic diagram of an in situ thermal/electrochemical testing system; the theoretical model of an NCM811 coin half-cell; the D50 values of four NCM811/rGO samples; the GITT potential curves versus testing time; the diffusion coefficients of Li+; the curves of heat flow at different voltages versus charging times; the DSC curves, the rate capability, and cycling stability data; the SEM image of NCM811/rGO-0.25 after cycling 100 times; the electrochemical/thermal model equations and boundary condition; and the parameters used for the simulation (PDF)This article has not yet been cited by other publications.
materials science, multidisciplinary,chemistry, physical,energy & fuels