Abstract:Heat generation, accumulation, and runaway severely affect the practical applications of lithium-ion batteries (LIBs) using Ni-rich Ni/Co/Mn ternary cathode materials. In principle, the aforementioned thermal characteristics of a LIB are mainly determined by the heat generation power of the cathode and anode materials during charging/discharging. In this work, the heat generation power of the LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode material coated with and without reduced graphene oxide (rGO) is studied systematically. By coupling an electrochemical workstation with a multichannel microcalorimeter, the heat generation power of NCM811 under different charging/discharging conditions was measured on coin cells. Meanwhile, a theoretical model was also proposed to analyze the intrinsic factors of the NCM811 that possibly affect its heat generation power during electrochemical charging/discharging. The results show that the particle size, lithium-ion diffusion coefficient, specific heat capacity, thermal conductivity, and electric conductivity can all affect the heat generation power. Different from that, the particle size and the lithium-ion diffusion coefficient of NCM811 are the dominating factors. It is demonstrated further that by coating rGO onto NCM811, the lithium-ion diffusion coefficient of NCM811 is improved, and the heat generation power is reduced accordingly.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.2c00026.Schematic diagram of an in situ thermal/electrochemical testing system; the theoretical model of an NCM811 coin half-cell; the D50 values of four NCM811/rGO samples; the GITT potential curves versus testing time; the diffusion coefficients of Li+; the curves of heat flow at different voltages versus charging times; the DSC curves, the rate capability, and cycling stability data; the SEM image of NCM811/rGO-0.25 after cycling 100 times; the electrochemical/thermal model equations and boundary condition; and the parameters used for the simulation (PDF)This article has not yet been cited by other publications.

Comprehensive Analysis on Dynamic Heat Generation of LiNi1/3Co1/3Mn1/3O2 Coin Cell under Overcharge

Dynamic Heat Generation of LiNi0.5Co0.2Mn0.3O2 Half Cell under Cycling Based on an in Situ Micro-calorimetry

Precise In-Situ and Ex-Situ Study on Thermal Behavior of LiNi1/3Co1/3Mn1/3O2/graphite Coin Cell: from Part to the Whole Cell

Overcharge Behavior and Early Warning Analysis of LiNi0.5Co0.2Mn0.3O2/C Lithium-Ion Battery with High Capacity

Comparison of the Overcharge Behaviors of Lithium-ion Batteries under Different Test Conditions

Thermal Behavior and Failure Mechanism of Lithium Ion Cells During Overcharge under Adiabatic Conditions

Thermal behavior and failure mechanisms of 18650 lithium ion battery induced by overcharging cycling

Comprehensive Investigation of a Slight Overcharge on Degradation and Thermal Runaway Behavior of Lithium-Ion Batteries

Overcharge-Induced Capacity Fading Analysis for Large Format Lithium-Ion Batteries with Liyni1/3co1/3mn1/3o2 + Liymn2o4 Composite Cathode

Failure mechanism of Li-ion battery at overcharge conditions

Thermally Driven Mesoscale Chemomechanical Interplay in Li0.5Ni0.6Mn0.2Co0.2O2 Cathode Materials

Investigation and Suppression of Oxygen Release by LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode under Overcharge Conditions

Analysis of the heat generation of lithium-ion battery during charging and discharging considering different influencing factors

Overcharge-Induced Phase Heterogeneity and Resultant Twin-Like Layer Deformation in Lithium Cobalt Oxide Cathode for Lithium-Ion Batteries

Investigation on the Thermal Behavior of Ni-rich NMC Lithium Ion Battery for Energy Storage

Thermal Safety Study of Li‐ion Batteries under Limited Overcharge Abuse Based on Coupled Electrochemical‐thermal Model

Regulating the Heat Generation Power of a LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode by Coating with Reduced Graphene Oxide

Hierarchical Reactions Involving Dynamic Structural Changes in Lithium-Ion Batteries during Overcharge Using Advanced Analytical Techniques

Abuse Tolerance Behavior Of Layered Oxide-Based Li-Ion Battery During Overcharge And Over-Discharge

Comprehensive Analysis on Aging Behavior and Safety Performance of LiNixCoyMnzO2/graphite Batteries after Slight Over-Discharge Cycle

Study on Thermal Safety of the Overcharged Lithium-Ion Battery