Abstract:Polyether ether ketone (PEEK) is a semi-crystalline thermoplastic polymer with excellent thermo-mechanical properties, bio-compatibility, corrosion resistance, and 3D printability. Due to these merits, it has wide applications in aeronautics and biomedical devices. However, PEEK's excellent thermo-mechanical properties come from its complicated crystalline domains, making it hard to predict and to design PEEK structures under complex service conditions. In this paper, we studied the thermomechanical behaviors of PEEK with stretch-induced anisotropy and developed a constitutive model to incorporate the influence of the complex loading history along different loading axes. From the experiments, it was found that when it is stretched, PEEK demonstrates viscoplastic behaviors with reduced transversal modulus and yield stress in the subsequent loading, due to the initiation and growth of voids during stretching. The tensile sample also shows a necking behavior at relatively low temperature. To capture these behaviors, the constitutive model consists of two main parts. The undamaged part has three branches, one hyperelastic branch for the nonlinear elastic behavior, one viscoelastic branch for glass transition and relaxation in the amorphous domains, and one plastic branch for yielding and hardening in the crystalline domains. The damaged loose-chain part with history-dependent reduced relaxation time is used to capture the microscopic interface debonding between the crystallites and the amorphous domains. Compared with the experimental results, this model captures the stretch-induced volume expansion and the anisotropic evolution of material properties. This developed model is also able to capture the temperature-dependent necking phenomenon and the corresponding nominal stress-strain behaviors in the uniaxial tensile tests at different strain rates and temperatures. The developed model can be used to facilitate the design of PEEK-based structures under complicated loading conditions.

Design of the Novel Hot Incremental Sheet Forming Experimental Setup, Characterization of Formability Behavior of Polyether-Ether-ketone (PEEK)

Experimental Study of High-Frequency Vibration Assisted Micro/Mesoscale Forming of Metallic Materials

PEEK Based Cranial Reconstruction Using Thermal Assisted Incremental Sheet Forming

Heat-assisted friction stir incremental sheet forming of thermoplastics

Optimizing Fused Deposition Molding Process Parameters for Improving Forming Strength of Polyetheretherketone

Achieving injection molding interlayer strength via powder assisted hot isostatic pressing in material extrusion polyetheretherketone

Improved design of fused deposition modeling equipment for 3D printing of high-performance PEEK parts

A review on the deformation mechanism and formability enhancement strategies in incremental sheet forming

Study of thermal stress deformation in hybrid 3D printing and milling process of PEEK material

Twist springback and microstructure analysis of PEEK sheets in ultrasonic-assisted thermal incremental forming

Analytical and Experimental Investigations on Deformation Mechanism and Fracture Behavior in Single Point Incremental Forming

Thermomechanical Behaviors of Polyether Ether Ketone (PEEK) with Stretch-Induced Anisotropy

Mechanical characterization of PEEK-CF/PEEK sandwich structures prepared via a combination of fused filament fabrication and epoxy post-bonding

Improvement in Mechanical Properties of 3D‐Printed PEEK Structure by Nonsolvent Vapor Annealing

An experimental investigation on the tensile properties of PEEK-PEI sandwich structures prepared via fused filament fabrication

Anisotropy and deformation heterogeneity in additive manufactured carbon-reinforced PEEK

The microstructural evolution of material extrusion based additive manufacturing of polyetheretherketone under different printing conditions and application in a spinal implant

Formability Analysis of Electrically Assisted Double-Side Multi-Point Incremental Sheet Forming

Effects of processing parameters and annealing on the mechanical properties of polyether ether ketone(PEEK) via fused deposition modeling(FDM)

Electrically-Assisted Incremental Sheet Forming Process for 2060-T8 Al-Li Alloy

Thermodynamic Coupling Forming Performance of Short Fiber-Reinforced PEEK by Additive Manufacturing