Abstract:Nominally identical permalloy nanowires, with widths down to 150 nm, were fabricated onto a single electron transparent Si$_{3}$N$_{4}$ membrane using electron beam lithography (EBL) and focused ion beam (FIB) milling. Transmission electron microscopy (TEM) experiments were performed to compare the nanostructures produced by these two techniques in what we believe is the first direct comparison of fabrication techniques for nominally identical nanowires. Both EBL and FIB methods produced high quality structures with edge roughness being of the order of the mean grain size 5 -10 nm observed in the continuous films. However, significant grain growth was observed along the edges of the FIB patterned nanowires. Lorentz TEM \emph{in situ} imaging was carried out to compare the magnetic behavior of the domain walls in the patterned nanowires with anti-notches present to pin domain walls. The overall process of domain wall pinning and depinning at the anti-notches showed consistent behaviour between nanowires fabricated by the two methods with the FIB structures having slightly lower characteristic fields compared to the EBL wires. However, a significant difference was observed in the formation of a vortex structure inside the anti-notches of the EBL nanowires after depinning of the domain walls. No vortex structure was seen inside the anti-notches of the FIB patterned nanowires. Results from micromagnetic simulations suggest that the vortex structure inside the anti-notch can be suppressed if the saturation magnetization (M$_{s}$) is reduced along the nanowires edges. Whilst the two fabrication methods show that well defined structures can be produced for the dimensions considered here, the differences in the magnetic behavior for nominally identical structures may be an issue if such structures are to be used as conduits for domain walls in potential memory and logic applications.

Magnetic nanostructures with defined magnetic states fabricated by focused ion beam

The growth of metastable fcc Fe78Ni22 thin films on H-Si(100) substrates suitable for focused ion beam direct magnetic patterning

On the magnetic properties of iron nanostructures fabricated via focused electron beam induced deposition and autocatalytic growth processes

Materials analysis and focused ion beam nanofabrication of topological insulator Bi2Se3

Scanning NV magnetometry of focused-electron-beam-deposited cobalt nanomagnets

Study of Magnetic Nanostructures Fabricated Using Laser Interference Lithography

Focused Ion Beam Assisted Interface Detection for Fabricating Functional Plasmonic Nanostructures

Scanning Nitrogen-Vacancy Magnetometry of Focused-Electron-Beam-Deposited Cobalt Nanomagnets

Magnetic Functionalization of Scanning Probes by Focused Electron Beam Induced Deposition Technology

Direct comparison of domain wall behavior in Permalloy nanowires patterned by electron beam lithography and focused ion beam milling

Manipulation of domain structures in LiNbO 3 thin films using focused ion beam

Sub-Micron Structures of Magnetic Materials Fabricated by Laser Holographic Lithography Combined with Ion Beam Etching

Fabrication of CoFe nanostructures by holographic lithography

Nanostructuring Optical Waveguides by Focused Ion Beam Milling. Near-Field Characterization

Tuning carrier density and phase transitions in oxide semiconductors using focused ion beams

Strain analysis in MEMS/NEMS structures and devices by using focused ion beam system

Focused-ion-beam stress introducing technology for micro/nano-fabrications

Ferrimagnetic Tb/Co multilayers patterned by ion bombardment as substrates for magnetophoresis

Nanoscale 3D tomography by in-flight fluorescence spectroscopy of atoms sputtered by a focused ion beam

Nanostructuring lithium niobate substrates by focused ion beam milling

XeF$_2$-Enhanced Focused Ion Beam Etching and Passivation of GaSb