Abstract:This Article puts forward a new idea to construct an electrode combining the advantages of a TiO2 nanotube photocatalyst and an excellent Sb-doped SnO2 electrocatalyst, which realized high electrocatalytic (EC) and photocatalytic (PC) oxidation efficiency at the same time. Under vacuum conditions, in virtue of the titanium oxide nanotubes (TiO2-NTs) as a template, well dispersed Sb-doped SnO2 (particle size 20 nm) was embedded into TiO2-NTs (diameter 60-90 nm and wall thickness 10-20 nm), resulting in the stake structured TiO2-NTs/Sb-doped SnO2 electrode (TiO2-NTs/SnO2). The loading amount of Sb-doped SnO2 on a TiO2-NTs/SnO2 electrode is 21.4 g m(-2), which is increased by 2 times compared with the situation of direct loading Sb-doped SnO2 on the Ti substrate (Ti/SnO2). The crystal lattice parameter of SnO2 becomes smaller, and crystal lattice parameter of TiO2 is larger, so the combination between TiO2-NTs and Sb-doped SnO2 becomes more tight. Compared with the electrochemical properties of Ti/SnO2, the apparent rate constant of benzoic acid (BA) conversion (k(s)) on the TiO2-NTs/SnO2 electrode is (1.44 +/- 0.04) x 10(-4) s(-1) and that of Ti/SnO2 is (1.0 +/- 0.03) x 10(-4) s(-1). Furthermore, its electrochemical stability and anti deactivation properties are greatly improved, and the accelerated service lifetime of the TiO2-NTs/SnO2 electrode is increased by 1.0 time. The initial instantaneous current efficiency of the degradation of BA on the TiO2-NTs/SnO2 electrode is 26.8%, and that on the Ti/SnO2 electrode is 13.3%. Compared with the PC properties of TiO2-NTs, the band gap of TiO2-NTs/SnO2 decreases from 3.22 to 2.93 eV, and the photoconversion efficiency is raised to 26.1 % from 8.2%. k(s) on TiO2-NTs/SnO2 is (0.82 +/- 0.02) x 10(-4) s(-1), and that of TiO2-NTs is (0.41 +/- 0.02) x 10(-4) s(-1). In the photoelectrocatalytic (PEC) aspect of BA, the current densities under 3.0 V increase by 4.0, 2.1, and 0.09 mA cm(-2) on the TiO2-NTs/SnO2, Ti/SnO2, and TiO2-NTs electrodes, respectively. The initial instantaneous current efficiency of the TiO2-NTs/SnO2 electrode increases to 100%, which is much higher than 41.7% and 31.3% on Ti/SnO2 and TiO2-NTs electrodes, respectively. k(s) on TiO2-NTs/SnO2 is (5.26 +/- 0.16) x 10(-4) s(-1), which is 3.2 times that of Ti/SnO2 and 4.8 times that of TiO2-NTs. The TiO2-NTs/SnO2 electrode has both excellent PC properties and excellent EC properties. After PEC degradation of BA on the electrode for 3.5 h, chemical oxygen demand (COD) removal is 100%. This research has enriched the PEC theory on the electrode's microstructured interface and developed a new idea for exploring highly efficient PEC technology.

Construction of TiO2 Nanotube Clusters on Ti Mesh for Immobilizing Sb-SnO2 to Boost Electrocatalytic Phenol Degradation.

Enhanced mass transfer and service time of mesh Ti/Sb-SnO2 electrode for electro-catalytic oxidation of phenol

Electrochemical Degradation of Refractory Pollutant Using a Novel Microstructured TiO2 Nanotubes/Sb-Doped SnO2 Electrode

Fabrication and Characterization of Pt Doped Ti/Sb-SnO2 Electrode and Its Efficient Electro-Catalytic Activity Toward Phenol

Preparation of a novel Ni/Sb co-doped Ti/SnO2 electrode with carbon nanotubes as growth template by electrodeposition in a deep eutectic solvent

Tio2-Nts/Sno2-Sb Anode for Efficient Electrocatalytic Degradation of Organic Pollutants: Effect of Tio2-Nts Architecture

A Composite Sb-Doped Sno2 Electrode Based On The Tio2 Nanotubes Prepared By Hydrothermal Synthesis

Constructing Stake Structured Tio2-Nts/Sb-Doped Sno2 Electrode Simultaneously with High Electrocatalytic and Photocatalytic Performance for Complete Mineralization of Refractory Aromatic Acid

A facile electroless preparation of Cu, Sn and Sb oxides coated Ti electrode for electrocatalytic degradation of organic pollutants

Influence of Gd Doping on the Structure and Electrocatalytic Performance of TiO2 Nanotube/SnO2−Sb Nano‐coated Electrode

Investigation on Preparation and Electrocatalytic Characteristics of Ti-base SnO2 Electrode with Nano-Coating

Morphology Evolution Effects on Electrochemical Activity of Hierarchically Stacking SnO2-Sb/TiO2-NTs Electrode Prepared by the Hydrothermal Method

Fabrication of sulfur-doped TiO2 nanotube array as a conductive interlayer of PbO2 anode for efficient electrochemical oxidation of organic pollutants

Novel Sieve-Like SnO2/TiO2 Nanotubes with Integrated Photoelectrocatalysis: Fabrication and Application for Efficient Toxicity Elimination of Nitrophenol Wastewater

Solvothermal Fabrication of Three-Dimensionally Sphere-Stacking Sb–SnO2 Electrode Based on TiO2 Nanotube Arrays

Preparation and Characterization on Sb Doped Ti-base SnO2 Electro-Catalytic Electrodes

Novel Sb-SnO2 Electrode with Ti3+ Self-Doped Urchin-Like Rutile TiO2 Nanoclusters As the Interlayer for the Effective Degradation of Dye Pollutants.

Preparation and Characterization of Ti/SnO2–Sb2O3–Nb2O5/PbO2 Thin Film As Electrode Material for the Degradation of Phenol

Novel vertically aligned TiO2 nanotubes embedded with Sb-doped SnO2 electrode with high oxygen evolution potential and long service time

Ti/SnO[sub 2]–sb Electrodes for Pollutant Degradation Prepared Using Ultrasonic Spray Pyrolysis

Distinctive Tin Dioxide Anode Fabricated By Pulse Electrodeposition: High Oxygen Evolution Potential And Efficient Electrochemical Degradation Of Fluorobenzene